Guest User!

You are not Sophos Staff.

Thread Info
  • State Verified Answer
  • +1 person also asked this people also asked this
  • Replies 10 replies
  • Subscribers 7 subscribers
  • Views 2998 views
  • Users 0 members are here
Options
Suggested

Bug Report - SSL VPN global setting "IPv4 lease range" start IP is now the network IP

cougarman

I updated via export/import all settings and now i saw, that the "Assign IPv4 addresses" is the value of "IPv4 lease range" start IP. So now i had 192.168.111.10/24 as network, what is wrong and hard to find, because configuration was running before ;-)

I dont know if it is relevant in an upgrade path other than export/import complete configuration.

Despite that I found the error, I can no longer connect to the Sophos from the iphone with openVPN and the GUI logfiles show nothing.

Parents Reply Children
  • 0 in reply to cougarman

    You can only specify one value, not three, so you can't have one IP for the interface/network/firewall and then a separate range for the clients. As far as I can tell, you specify the start and that will also be the interface/network/firewall IP, and clients will start at the next IP.

    So if you specify 192.168.100.1, the interface will have that address and the clients will start at 192.168.100.2. At least that's how it's working for me, and it seems reasonable, though different. It would be nice to be able to specify all three, so you could, say, have the interface be 192.168.100.250 and the clients be 192.168.100.5-192.168.5.55, but...

Unfiltered HTML