Thread Info
  • State Suggested Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 9 replies
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 16471 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IPSec Site 2 Site VPN XG 115

BRANDO CORSINI

Hi,

I've setup one Site 2 Site VPN between two XG 115, link is up but I'm unable to ping host on site 1 from host/firewall on site 2 and viceversa, below the configuration:

 

SITE 1 (branch office):

 

 

SITE 2 (head office):

 

 

Site 1 XG115 has SFOS 17.0.0 GA firwmare

Site 2 XG115 had SFOS 16.05.5 MR-5 firmware

Thank you!

 



This thread was automatically locked due to age.
Parents
  • 0

    Hi Brando,

    Do a quick check on the subnets defined in the Local and Remote network configuration of the IPSec policy. Make sure they are correct on either end. Next, go to; Administration > Device Access and check if the Ping is selected in the VPN row. I would also request you to upgrade to v17 before we take further look.

    Thanks

  • 0 in reply to sachingurung

    Hi,

    I check all the subnet defined on both sides, upgrade to v17, check ping over vpn but nothing changed.

     

    Can you please help me?

     

    Thanks

  • 0 in reply to BRANDO CORSINI

    I have the exact same problem despite having followed all the instructions - tunnel comes up instantly but no traffic, not even pings, make it across. What more is needed - I mean the whole point with site to site VPN is to link 2 LANs so why doesn't it work when set up as instructed?

    Tunnel is active

    Setup on server

    Firewall rules (mirrored on client)

Reply
  • 0 in reply to BRANDO CORSINI

    I have the exact same problem despite having followed all the instructions - tunnel comes up instantly but no traffic, not even pings, make it across. What more is needed - I mean the whole point with site to site VPN is to link 2 LANs so why doesn't it work when set up as instructed?

    Tunnel is active

    Setup on server

    Firewall rules (mirrored on client)

Children
No Data