This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Open SSL VPN - Access local server - Wrong IP

Hi guys,

I'm new in configurating XG Firewall. I use the XG85W.

 

I've configured Open SSL VPN based on the tutorial https://community.sophos.com/products/xg-firewall/p/vpnremoteaccess.

I can connect via VPN, but I get an IP 10.20.6.X, which I've set in VPN Settings, and don't reach my internal resources, which based on 10.20.5.X.

My #Port 1 LAN is configured to 10.20.5.1/255.255.255.0

If I want to assig the IPv4 Lease Range to 10.20.5.100 - 10.20.5.120 under VPN => "Show VPN Settings" the firewall disallow and throws "Network with the same IP address as start lease IP already exits choose diferent IP address".

How can I reach my internal network to access Servers?
What I'm doing wrong?

Regards

Marco



This thread was automatically locked due to age.
Parents
  •  Hello Marco,

     

    You need to set VPN DHCP lease different from your LAN interface in you SSL VPN settings.

    Then go to VPN > SSL VPN(REMOTE ACCESS) and create a remote access policy and select all SSL VPN users under identity. Create a network firewall Rule as following.

     

    Src Zone: VPN, Src Network: Any, Dst Zone: LAN, Dst Network: Any, Service: Any, Match Identity: Untick

     

    Regards, Ronak.

     

Reply
  •  Hello Marco,

     

    You need to set VPN DHCP lease different from your LAN interface in you SSL VPN settings.

    Then go to VPN > SSL VPN(REMOTE ACCESS) and create a remote access policy and select all SSL VPN users under identity. Create a network firewall Rule as following.

     

    Src Zone: VPN, Src Network: Any, Dst Zone: LAN, Dst Network: Any, Service: Any, Match Identity: Untick

     

    Regards, Ronak.

     

Children
No Data