Thread Info
  • State Verified Answer
  • +2 person also asked this people also asked this
  • Locked Locked
  • Replies 4 replies
  • Subscribers 27 subscribers
  • Views 9548 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SSL VPN Remote Access with NAT interface

Joe Plunkett

Hello, I am configuring an SSL VPN [Remote Access] - The WAN interface on the XG 210 is NATed, and the client is trying to connect to the internal IP and not the Real Public one where it should. I have looked everywhere, but cannot find a way to change the setting. Anyone know what I need to do? 



This thread was automatically locked due to age.
Parents
  • +3

    Hi Joseph Plunkett,

    To point SSL VPN client to some different Domain Name or IP (Live Public IP),  kindly update "Override Hostname" under Configuration > VPN > Show VpN Setting > SSL

    In Override Hostname enter your Live IP.  Make sure you have enabled SSL VPN for WAN zone under Device Access and installed new  SSL VPN client and configuration after updating the setting.

    Regards, Ronak.

Reply
  • +3

    Hi Joseph Plunkett,

    To point SSL VPN client to some different Domain Name or IP (Live Public IP),  kindly update "Override Hostname" under Configuration > VPN > Show VpN Setting > SSL

    In Override Hostname enter your Live IP.  Make sure you have enabled SSL VPN for WAN zone under Device Access and installed new  SSL VPN client and configuration after updating the setting.

    Regards, Ronak.

Children