Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 28 subscribers
  • Views 8518 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IPSec site to site errors can't get tunnel to connect

Casey Johnson

Hello,

I am new to the XG firewall but not new to UTM.  I was able to get this VPN to work site to site with the UTM but not with the XG.  Going between a Moxa router and the XG, I get this error on the XG Side:

System did not accept any proposal received.  Need to reconfigure the connection either of the ends

I've done this about 10 times, made sure all the numbers match, everything.  Using AES256/MD5 for both phases, Group 2 for both phases, timeouts match.

I don't see any other logs for the IPSec errors in the XG.  Is there somewhere specific to look?  I do get through Phase 1 when the Moxa connects in; however the Phase 2 never makes it.

Thanks!



This thread was automatically locked due to age.
Parents
  • 0

    Hi Casey,

    i assume you are running XG firewall version 16.05 and would suggest you to try using XG 17. Allot has changed in the IPSec area in v17 and your problem may be already solved.

    If the issue remains, please provide /log/charon.log.

    Regards,

    Afschin

Reply
  • 0

    Hi Casey,

    i assume you are running XG firewall version 16.05 and would suggest you to try using XG 17. Allot has changed in the IPSec area in v17 and your problem may be already solved.

    If the issue remains, please provide /log/charon.log.

    Regards,

    Afschin

Children
No Data