XG 135 Bridge LAN to Wifi

Question

I created wifi with option "Bridge to AP LAN" as per guide. 
 This wifi does not appear in Network-->interface so I can create bridge with LAN. 
 Anyone have any idea

Iffi · Accepted Answer

I received following solution from level 2 engineer and its Work 
 "The process for bridging AP to LAN is slightly different for XGs with Built in APs compared to external APs. With Built in APs, you will see the Interface there to create the bridge but for External APs you do not. When you create a SSID and set that to be "Bridge to AP LAN" it's essentially bridging the AP to everything that is connected to that Port in the backend. So, if you have your APs hooked up to the XG to a switch that led into the LAN port (Port1). When you create a SSID and set it to be Bridge to AP it will bridge that AP to everything else that is also connected to that LAN port. So, if you try this and connect to the SSID in question you should be able to access all the resources that are on the port that these APs are connected to"