Can't run Speed Tests

Hi,

what firewall rules have you installed?

You will need to finetune IPS even if you do not have it enabled on your firewall rule.

Ian

rfcat_vk said:

Hi,

what firewall rules do you installed?

You will need to finetune IPS even if you do not have it enabled on your firewall rule.

Ian

 

I have the default out-of-box rules installed.

I have tried opening ports 8080 and 5060 as I found some sites that say speed tests can use those ports, but still no good.

What fine tuning to IPS would I have do to?

TIA

Both web policy and IPS are set to 'None'

don't know what most speed tests are not working, was able to find http://speakeasy.net/speedtest and that one does work

very strange

Please open port 8080 for speed tests to work. This problem bothered me for many weeks. Nothing showed blocked in the logs. Finally, I decided to open port 8080 for outgoing traffic and the problem was fixed.

One of the first things I tried is open port 8080.  That did not help

The only speedtest I can get to work are https://www.speakeasy.net/speedtest/ , http://www.dslreports.com/speedtest and https://fast.com/

http://beta.speedtest.net doesn't work, http://www.speedtest.net doesn't work, http://speedtest.xfinity.com/ doesn't work, https://www.verizon.com/speedtest/ doesn't work, 

Hi,

I suspect you are having issues with the flash based speed tests, try speedof.me. I tried a couple of those sites and one reports I am using a proxy on port 3128 and then fails because my firewall does not support byte something and then further tells me I have a bad anti-virus (windows) on my mac to get a better one. Pity, no anti-virus on mac at moment.

I also suspect you have enabled some additional application based rules which are getting in the road.

Ian

Extra stuff. Changing the IPS settings in your firewall rules to NONE does not disable IPS, you need to set the DOS flood rules to disable.

Very strange. I had exactly the same problem, same speed test websites not working and same ones working as you described.

For me, port 8080 (both TCP and UDP) did the trick. Of course, I have other ports opened, these include DNS, FTP, HTTP, HTTPS, ICMP, IMAP, NTP, PING, POP3, SMTP, TCP 5228, TCP 5223, UDP 500, TCP 8245, TCP 587 and 465, TCP 8888, TCP 11371, IMAP SSL, GMAIL POP3, TCP 8080, UDP 8080, TCP 5060, UDP 5060 and VPN TCP 110.

Please check if opening port 8080 for both TCP and UDP helps. I have all other protections like WAF, IPS, Web filtering, DoS etc. disabled.

Hi,

got the same problem. Opening Port 8080 for TCP did the job.

But why is this Port requierd to be open?
I dont want to have this port opend.

It is sometimes used as an http alternative.

Try speedof.me for your speed test.

Ian

Update on testing.

My IPS settings had no affect on the speedtestfast.com performance. I have tuned my IPS policy.

Using http/s as the allowed protocols caused the tests to run very slow with block unknown protocols disabled. Also required an update to flash part the way through the test.

Ian

Testing again.

IPS>>DoS & Spoof Protection>>DoS Settings>>Disabling ICMP/TCP flooding should make speedtest work. 

Hi folks,

to enable speedtest.net to work I have a firewall rule specifically for port 8080 and the IPS working.

Lots of junk, but not from speediest.

Ian

Hi folks,

to enable speedtest.net to work I have a firewall rule specifically for port 8080 and the IPS working.

Lots of junk, but not from speediest.

Ian