Guest User!

You are not Sophos Staff.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 3 replies
  • Subscribers 27 subscribers
  • Views 9182 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Setup STAS create a collector

Nino Padrutt

Hi

 

I setup a new XG115 and tried to setup the STAS. For that I tried to follow this guide: https://community.sophos.com/kb/en-us/123156

Unfortunately, in the part for the firewall configuration it seems there are some commands missing:

 

Step 2: Configure a Collector Port and Group in SFOS

  1. Log in to the SFOS CLI using an Administrator profile.

  2. Go to Option 4. Device Console.

  3. Execute the following command to enable Sophos Transparent Authentication.

  4. Execute the following commands to add a collector IP and a collector port, as well as create a collector group.

 

 

I activated the Sophos Transperant Authentication Suite on the GUI under Authentication - STAS. Now is the collector left. Can anyone guide me to a guide where it states how to configure it or tell me how the command for that part is ? 

 

Thanks



This thread was automatically locked due to age.
Parents
  • 0

    You can use these commands :

     

    console> system auth cta show

    console> system auth cta enable

    console> system auth cta collector add collector-ip  <ip-address> collector-port 6677 create-new-collector-group

     

    However, both these commands are equivalent to enabling STAS and adding a Collector from GUI.

Reply
  • 0

    You can use these commands :

     

    console> system auth cta show

    console> system auth cta enable

    console> system auth cta collector add collector-ip  <ip-address> collector-port 6677 create-new-collector-group

     

    However, both these commands are equivalent to enabling STAS and adding a Collector from GUI.

Children
No Data