Guest User!

You are not Sophos Staff.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 5 replies
  • Answers 1 answer
  • Subscribers 27 subscribers
  • Views 15922 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

CR25iNG to SFOS fails to upgrade

Tony Clayton

I am having an issue trying to upgrade a CR25iNG to SFOS.
I have updated the device to latest cyberoam FW which is 10.6.5, reset to defaults, and also reboot to the older firmware 10.6.2 MR-1.
I have tried 3 versions of the Sophos firmware SW-SFOS_16.05.3_MR-3.SFW-183.gpg, SW-SFOS_16.01.3_MR-2.SFW-265.gpg and SW-SFOS_16.01.4_MR-3.SFW-342.gpg.
Each time I have tried either uploading or uploading plus boot it fails with this message.
New Firmware could not be uploaded. Please refer online help for possible reasons.

Any help would be appreciated.

Thanks



This thread was automatically locked due to age.
Parents
  • 0

    HI Tony, 

    You may first need to check the Disk utilization, I would suspect that would be the case you are experiencing. 

    You may check the disk utilization via the command on console> system diagnostics show disk. 

    Options to resolve your issue 

    Purge some months of reports or Disable the Service of IPS and AV on your XG then upgrade the firmware. After the firmware is upgraded you may enable the AV and IPS again.

Reply
  • 0

    HI Tony, 

    You may first need to check the Disk utilization, I would suspect that would be the case you are experiencing. 

    You may check the disk utilization via the command on console> system diagnostics show disk. 

    Options to resolve your issue 

    Purge some months of reports or Disable the Service of IPS and AV on your XG then upgrade the firmware. After the firmware is upgraded you may enable the AV and IPS again.

Children