Using WAN Alias IP for multiple LAN

Stéphane,

LAN and wan are zones, so you should bind the physical ports (where public ip addresses arrive) to wan zone. Use alias on the same physical interface, unless the used ip are not in the same subnet.

Regards

my config is :

eth0 : 192.168.1.254

eth1 : 192.168.2.254

eth3 : 192.168.3.254

eth 4 : (for example : 12.12.12.12 /29)

on eth0 --> LAN (1) 192.168.1.1 to 192.168.1.250

on eth1 --> LAN (2) 192.168.2.1 to 192.168.2.250

on eth2 --> LAN (3) 192.168.3.1 to 192.168.3.250

On each lan, when a pc goes to www.monip.org my public ip is 12.12.12.12

I want to have in LAN (1) the public ip 12.12.12.13, in LAN (2) the public ip 12.12.12.14

....

Ok so you need to create a firewall rule and apply masquerading nat. So create 2 rules, one for the first LAN with nat 12.12.12.13 and another one for LAN 2 and  nat 12.12.12.14. You can create additional nat inside services menu.

Regards

thanks you for your support ..

I try this

then

and

are you OK ?

Stéphane,

you are posting on the wrong forum. Anyway the configuration will work.

You are using UTM9.

Regards

Stéphane,

you are posting on the wrong forum. Anyway the configuration will work.

You are using UTM9.

Regards

Sorry,

thanks you for your support, but it still doesn't work ....

I'll check and post in the right forum :-))