Guest User!

You are not Sophos Staff.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 2 replies
  • Subscribers 26 subscribers
  • Views 3007 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XG 115 and a AP 100: Require network printing for 2 printers on different IP

Nigel Baker

I have a XG 115 and a AP 100. They are configured as: Wifi newtork 10.10.20.1 - 10.10.20.20/100 in a separate zone: AP connected to Port4 with 10.10.10.1 - 10.10.10.10/100: Firewall rules set for wifi to lan, lan to wan. All wifi users have internet access.

My question:

I have 2 network printers with ip addresses 192.168.178.21/31

How do I setup network printing

 

Thanks



This thread was automatically locked due to age.
Parents
  • 0

    Nigel,

    welcome to Sophos Community. I gues your printers use physical network cable and they are connected to LAN zone. In any case you will need a LAN to LAN firewall rule in order to allow computers to access your printers. If your Wi-FI belong to a different zone (because you created another one) you will need a (your zone) to lan firewall rules.

    Make sure you uncheck "match know users".

    Regards

Reply
  • 0

    Nigel,

    welcome to Sophos Community. I gues your printers use physical network cable and they are connected to LAN zone. In any case you will need a LAN to LAN firewall rule in order to allow computers to access your printers. If your Wi-FI belong to a different zone (because you created another one) you will need a (your zone) to lan firewall rules.

    Make sure you uncheck "match know users".

    Regards

Children