Guest User!

You are not Sophos Staff.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 8 replies
  • Answers 1 answer
  • Subscribers 26 subscribers
  • Views 3954 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

using wireless as a physical connection and create the appropriate firewall rules.

B.R.O.

 I would like to talk about my plan using wireless as a physical connection and create the appropriate firewall rules, but I can't afford for wireless not to work when I deploy my XG 310.

 

I have a wireless switch that one cable goes into the core switch and the other goes into the firewall (Port 4 on the XG310) Physical Interface 10.141.19.1/24

 

The XG310 is aware of the traffic with these Interfaces configured...

Port 4 - Zone_WIRELESS_RADIOS 10.141.19.1/24 Physical 

Port 4.21 - Zone_Private_WIRELESS 10.141.21.1/24 VLAN

Port 4.254 - Zone_WIRELESS _GUEST 172.16.254.1/24 VLAN

 

In case I miss something I created 2 rules on the bottom

Port1_to_Port4 from Lan to Zones WIRELESS RADIOS & PRIVATE WIRELESS

Port4_to_Port1 from ZONES RADIOS & PRIVATE WIRELESS to LAN

Then added these rules defining the Zone traffic

 

LAN_to_WIRELESS RADIOS

WIRELESS RADIOS to LAN

WIRELESS RADIOS_to_Wan

WAN to WIRELESS RADIOS

PRIVATE WIRELESS TO LAN

LAN to PRIVATE WIRELESS

PRIVATE WIRELESS to WAN

WAN TO PRIVATE WIRELESS

GUEST_WIRELESS TO DMZ

DMZ to GUEST_WIRELESS

 

 



This thread was automatically locked due to age.
Parents Reply Children
No Data