Guest User!

You are not Sophos Staff.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 4 replies
  • Subscribers 26 subscribers
  • Views 6701 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

I need Instructions step by step setting up XG 105 ssl vpn remote access.

DMC

I have read the admin guide, and I have not been successful in setting up the VPN.

Can someone please supply a step by step instructions for the XG 105 for SSL VPN Remote.

When there are choices to be made, please explain the consequence of each choice and which is the better choice.

Thank you



This thread was automatically locked due to age.
Parents
  • 0

    I need to add on that the firmware is 16.

    1. Over ride host name. What exactly needs to be put there. The internet connection is DHCP and there is an account with DNYDNS.org

    2. Does the domain host name in the SSL settings need to be filled? Can you give an example? Is it based on any information in the general firewall setup?

    3. In the SSL VPN Remote settings what do I choose for Network resources. It shows the 4 default ports. Port 1 is the Lan. Port 2 is the Wan. Port 3 is the DMZ. I selected Port 1.

    Also I was able to connect to the firewall and get the network IP address onto the remote computer. However I can't access the computers on the network, nor can I ping them.

    Thank you

  • +1 in reply to DMC

    Jay,

    you can find the guide here:

    https://community.sophos.com/kb/en-us/122769

    If you are unsuccessful, please share screenshot of what you have done.

    Thanks

  • 0 in reply to lferrara

    Thank you. It works.

    However you should know that my XG 105 with version 16 is slightly different than the instructions layout. I had to find the settings in your guide in the new location in this firmware version.

    For example Network Policy is now called Firewall.

    There were a few steps in your guide which the Admin Guide didn't refer to.

    Also I don't understand why your guide says there should be NO vpn policy. (I did enable the policy that I created)

     

Reply
  • 0 in reply to lferrara

    Thank you. It works.

    However you should know that my XG 105 with version 16 is slightly different than the instructions layout. I had to find the settings in your guide in the new location in this firmware version.

    For example Network Policy is now called Firewall.

    There were a few steps in your guide which the Admin Guide didn't refer to.

    Also I don't understand why your guide says there should be NO vpn policy. (I did enable the policy that I created)

     

Children
No Data