Guest User!

You are not Sophos Staff.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 6 replies
  • Subscribers 27 subscribers
  • Views 24116 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

change portal port 443

Bengt Olsson

Hey, 

Try fix an Business Application Rule for my exchange 2016 but says port 443 is used with user portal!!

Can change that what happen if change!!



This thread was automatically locked due to age.
Parents
  • +1

    Bengt,

    you can change the user portal without any problem. Of course if you use it, you have to inform all users that the user portal link is changed.

    You can change the user portal under Administration > Admin Settings

    Regards,

  • 0 in reply to lferrara

    Hey,

    have done that but coming to Sophos user portal not my owa what is wrong

  • 0 in reply to Bengt Olsson

    Hello,

    On my UTM, I set the user portal of the UTM and also of my XG to 11443.  Did you try a reboot after changing the XG user portal from 443 to what ever you made it? Usually after making most UTM and XG changes, they work and no reboot needed. 

    I use 443 to forward to my web server and allow only https into my web server behind the UTM.

    Assuming owa is using and listen on 443, after changing XG user portal to something else, I would think it show / go to owa and not the XG user portal.

    Did you just update from UTM to XG or was owa working earlier and you enabled the user portal? You might need to edit or create a port forwarding rule to route 443 to the owa server.

    I am well versed with Sophos UTM and just now learning the XG v 16. Used the USER portal on port 11443 without issues on UTM v9, and the port forwarding of 443 / HTTPS to the web server with a port forwarding rule / Nat and DNAt to point to the 443 to the desired server.

    See if the business policy / rule is still pointing 443 to the User Portal. I would think after you tell XG to have the user portal listen on the port number you set it to, that it would only be listening for that port and not also on port 443.  So if you had a rule pointing 443 to a server or service that was not correct, I would think you would not get anything.  In the next week or two I will be configuring XG to port forward 443 to the web server, and my user portal is already set to 11443, I just need to set up and enable myself on the user portal and HTML5 VPN sessions. I will see if I run into a similar issue as you have. I hope by the time of my writing you have resolved the issue.

    Chad

Reply
  • 0 in reply to Bengt Olsson

    Hello,

    On my UTM, I set the user portal of the UTM and also of my XG to 11443.  Did you try a reboot after changing the XG user portal from 443 to what ever you made it? Usually after making most UTM and XG changes, they work and no reboot needed. 

    I use 443 to forward to my web server and allow only https into my web server behind the UTM.

    Assuming owa is using and listen on 443, after changing XG user portal to something else, I would think it show / go to owa and not the XG user portal.

    Did you just update from UTM to XG or was owa working earlier and you enabled the user portal? You might need to edit or create a port forwarding rule to route 443 to the owa server.

    I am well versed with Sophos UTM and just now learning the XG v 16. Used the USER portal on port 11443 without issues on UTM v9, and the port forwarding of 443 / HTTPS to the web server with a port forwarding rule / Nat and DNAt to point to the 443 to the desired server.

    See if the business policy / rule is still pointing 443 to the User Portal. I would think after you tell XG to have the user portal listen on the port number you set it to, that it would only be listening for that port and not also on port 443.  So if you had a rule pointing 443 to a server or service that was not correct, I would think you would not get anything.  In the next week or two I will be configuring XG to port forward 443 to the web server, and my user portal is already set to 11443, I just need to set up and enable myself on the user portal and HTML5 VPN sessions. I will see if I run into a similar issue as you have. I hope by the time of my writing you have resolved the issue.

    Chad

Children
No Data