Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 26 subscribers
  • Views 7404 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

WAF Setup confusion

RobertDavis

I have 2 separate website private IPs and 2 public IPs.  One for our main site (www.xxxxx.com) and one for a test site (webtest.xxxxx.com).  I setup an IP Alias for the Local IP on my LAN port.  I then created the HTTP business rule for domain webtest.xxxxx.com to the webtest server.  So now the rules shows SRC=Any Host/Any Port DEST=#port1:0 (ip alias).  I can't get anything from outside on the webtest.xxxxx.com public IP.

A non-HTTP rule opening port 80 and 443 work fine.



This thread was automatically locked due to age.
Parents
  • 0

    UGH! I can't believe I problems with this.  It was easy to fix once I figured out the correct steps. In case anyone else needs it.

    1) Create IP alias for the public IP on the WAN port (Port2 in my case)

    2) Create http business rule and use the IP alias as your Hosted Address.

    3) Web Server will be your private IP address.

    Setup anything else you need and it should work. I needed Pass Host Header at least.

Reply
  • 0

    UGH! I can't believe I problems with this.  It was easy to fix once I figured out the correct steps. In case anyone else needs it.

    1) Create IP alias for the public IP on the WAN port (Port2 in my case)

    2) Create http business rule and use the IP alias as your Hosted Address.

    3) Web Server will be your private IP address.

    Setup anything else you need and it should work. I needed Pass Host Header at least.

Children
No Data