Thread Info
  • State Suggested Answer
  • +2 person also asked this people also asked this
  • Locked Locked
  • Replies 15 replies
  • Answers 2 answers
  • Subscribers 33 subscribers
  • Views 28690 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Installed but wont boot on Dell R210 II Bare Metal

DerekBaxter

Have tried installing a few times and always get "no boot device available" after reboot of install. 

No errors during the install. Completes successfully.

Confirmed its writing SOMETHING to the drive as I have formated it with ext4, reinstalled and gone back to check it with gparted and it shows the entire disk as unallocated.

Are there any logs I can look at during the install?

I have tried an MBR repair but it is saying no partitions are on the drive.



This thread was automatically locked due to age.
Parents
  • 0

    I have the same problem on the same server Dell PowerEdge R210 II

    The installation completes successfully with no errors but the system will not boot next.

    I tried changing the boot mode (BIOS / UEFI) and re-install but it does not fix it

    I tried changing the modes (ATA / AHCI / RAID) and re-install but it does not fix it

    Could someone help us how to troubleshoot this problem?

Reply
  • 0

    I have the same problem on the same server Dell PowerEdge R210 II

    The installation completes successfully with no errors but the system will not boot next.

    I tried changing the boot mode (BIOS / UEFI) and re-install but it does not fix it

    I tried changing the modes (ATA / AHCI / RAID) and re-install but it does not fix it

    Could someone help us how to troubleshoot this problem?

Children
No Data