Guest User!

You are not Sophos Staff.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 27 subscribers
  • Views 9394 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XG Setup with Cable Modem

RichardPearl

Been using 105, in BRIDGE mode with a ISP-supplied router for many weeks now.  Had to change-over to a cable modem ISP.  Modem subnet is different than LAN subnet that contains many static IPS.  Not able to change modem's IP.  How do I go about setting the 105 for GATEWAY mode?  Will I need to change every single static now in a 192.168.1.x subnet to the new 192.168.100.x subnet??



This thread was automatically locked due to age.
Parents
  • 0

    Has any device ever worked on this cable modem?

    If you are seeing a 192.168.100.x address from the cable modem, that is an indication that the cable modem isn't online.  The CM will hand out 192.168.100.x addresses from its internal DHCP server when the DOCSIS (network) side is not active.

Reply
  • 0

    Has any device ever worked on this cable modem?

    If you are seeing a 192.168.100.x address from the cable modem, that is an indication that the cable modem isn't online.  The CM will hand out 192.168.100.x addresses from its internal DHCP server when the DOCSIS (network) side is not active.

Children
No Data