Guest User!

You are not Sophos Staff.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 26 subscribers
  • Views 8940 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

A policy to block port 80 and 443 from the WAN side (pass a port scanner test)

MichaelEibye

Hi,

I have tried various ways of making a policy to block port 80 and 443 on the firewall from the WAN side, but without luck. I only want to access the firewall from the LAN side and want any port scanner on the WAN side to report these as closed. How would the policy look like?



This thread was automatically locked due to age.
Parents
  • 0

    Michael, 

    by default all traffic is blocked unless a specified policy rule is allowing traffic. 80 and 443 could be open from outside if HTTP and HTTPS services are open under System > Administration > Device Access.

    Check there if HTTP and HTTPS are open. Admin and User portal are using that ports. You can change the user portal to another port.

    Hope this helps.

Reply
  • 0

    Michael, 

    by default all traffic is blocked unless a specified policy rule is allowing traffic. 80 and 443 could be open from outside if HTTP and HTTPS services are open under System > Administration > Device Access.

    Check there if HTTP and HTTPS are open. Admin and User portal are using that ports. You can change the user portal to another port.

    Hope this helps.

Children
No Data