Guest User!

You are not Sophos Staff.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 26 subscribers
  • Views 328 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

[XG V19] Route a single host through a different WAN

Andrea_e

I need to route a single host through a WAN that is not the default wan.

In the previous firmware version I just had to create a firewall rule and specify the gateway, but now...I'm lost.

I've followed this article Sophos Firewall v19: How to Choose The Gateway For A Firewall Rule, but or I'm missing something, or there is not the section where the SD-WAN routes is applied to a firewall rule.

Thanks!
Andrea



This thread was automatically locked due to age.
Parents
  • 0

    Hello Andrea,

    Thank you for contacting the Sophos Community.

    Since version 18, Firewall Rules and NAT Rules are decoupled (you can take a look at this that explains a bit more about it)

    Because of that change, the SDWAN and Firewall Rules work in matching criteria. This Recommended Read should help you clarify this a bit more.

    Additionally, I'd recommend signing up for this Interactive Training course. That will help you familiarize yourself with some changes you’ll see from v18 onward.

    Regards,

Reply
  • 0

    Hello Andrea,

    Thank you for contacting the Sophos Community.

    Since version 18, Firewall Rules and NAT Rules are decoupled (you can take a look at this that explains a bit more about it)

    Because of that change, the SDWAN and Firewall Rules work in matching criteria. This Recommended Read should help you clarify this a bit more.

    Additionally, I'd recommend signing up for this Interactive Training course. That will help you familiarize yourself with some changes you’ll see from v18 onward.

    Regards,

Children
No Data