This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ROS Sophos

Hi, 

I'm new with this equipments, i'm trying to configure VLANS between two equipments (SOPHOS -» Switch)

SOPHOS:

- WAN - DHCP from ISP router

- LAN PORT1

IP: 192.168.100.1/24 - ZONE LAN

1.10 - VLAN 10 - 192.168.10.1/24 - PORT 1 - ZONE LAN

1.20 - VLAN 20 - 192.168.20.1/24 - PORT 1 - ZONE LAN

Have DHCP configured for the physical port and each vlan.

The firewall is configured to allow any traffic for ZONE LAN

On the switch side:

Configured port 8 (connected to sophos PORT1) as trunk tagged

port 1 as vlan 10 untagged

port 2 as vlan 20 untagged

I cant get DHCP on the switchports 1 and 2 but if i configure manually ip address on the computers NIC i can ping the vlan respective vlan gateway (ex: 192.168.10.1) and have access the internet.

I'm missing any configuration as i'm using router on a stick?



This thread was automatically locked due to age.

Top Replies

  • in reply to IT 2 +2 suggested

    Hi,

    the XG creates the VID when you create your VLANs. Does your switch support L3 VLANs, though this shouldn't be an issue with v19.x and you do not need an addressor the physical port.

    Ian

    Jump to answer
Parents
  • I did a default config on the firewall, reconfigured with the same configs and now its working... wtf

    I have created 6 vlans each one assigned to the first 6 switchport (vlan10 - swport1, vlan20 - swport2,...)

    Vlan10: 192.168.10.1

    Vlan20: 192.168.20.1

    Vlan30: 192.168.30.1

    ...

    From each vlan i can ping other vlans ip interface (ex. from vlan 30 i can ping 192.168.10.1) can this be blocked or its impossivel because its a switch virtual port?

    I can ping only the svp ip and not the equipments itself on the other vlan so its not doing inter vlan routing and thats good. Can i block too pings to the other svp interface

  • Hi,

    from memory you have a firewall rule allow all inter lan traffic, disable it.

    ian

    XG115W - v19.5.1 mr-1 - Home

    If a post solves your question please use the 'Verify Answer' button.

Reply Children