RED DEVICE WONT WORK

CASE :  05887593

Hi

I am trying to set up a red device connexion between sophos XG 230 with the lastest firmware and a sd-RED 20

i've tried configuration of the red device with the two ways ( the usb stick and also upload configuration from internet ) and both were not working .

The RED is connected via WAN port directly to the LAN of ISP router . The ISP ROUTER is in DHCP MODE , when am connected to ISP router via Laptop it gaves me an IP ADDRESS .

LED STATS :
The wan port is in solid green STATE .
SYSTEM and Router ,they remain green sometimes solid other times blinking
The internet LED is always OFF

I connected via COM cable here's the log : 

Device has booted from: image2
INITRAMFS: 1
initramfs in use, no need for ramoverlay
Using /dev/mtdblock15 (/dev/mtd15) as data partition
Using /dev/mtdblock7 (/dev/mtd7) as self partition
Serial Number: R20003XCQWPT9A2
OS version: 1-1225-48bdbfdac-b1551d2
SoC frequency: 800000
Board: RED20
REV: C
[ 6.709593] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 6.909923] hub 1-1:1.0: USB hub found
[ 6.914041] hub 1-1:1.0: 4 ports detected
[ 7.013725] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 7.053823] hub 2-1:1.0: USB hub found
[ 7.057920] hub 2-1:1.0: 4 ports detected
[ 7.245597] usb 1-1.1: new high-speed USB device number 3 using xhci-hcd
[ 7.371226] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[ 7.382258] scsi host0: usb-storage 1-1.1:1.0
Using UBIFS on Data /dev/mtdblock15
[ 7.559551] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 1160
[ 7.904509] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "cfg"
[ 7.911691] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 7.921638] UBIFS (ubi0:0): FS size: 15618048 bytes (14 MiB, 123 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
[ 7.932017] UBIFS (ubi0:0): reserved for root: 737678 bytes (720 KiB)
[ 7.938482] UBIFS (ubi0:0): media format: w4/r0 (latest is w5/r0), UUID CDF87CB8-6633-4E1A-880B-B4627C8E036D, small LPT model
[ 7.957839] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 1163
[ 8.180030] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "wifi"
[ 8.187307] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 8.197254] UBIFS (ubi0:1): FS size: 7237632 bytes (6 MiB, 57 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
[ 8.207373] UBIFS (ubi0:1): reserved for root: 341850 bytes (333 KiB)
[ 8.213838] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 80813ADA-C057-4D76-B83C-29E0724D2496, small LPT model
Mount Done.
reorder interfaces...
reorder interfaces... Done.
[ 8.390100] scsi 0:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 2
[ 8.405693] sd 0:0:0:0: [sda] 30269440 512-byte logical blocks: (15.5 GB/14.4 GiB)
[ 8.422250] sd 0:0:0:0: [sda] Write Protect is off
[ 8.433938] sd 0:0:0:0: [sda] No Caching mode page found
[ 8.440419] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 8.457862] sda:
[ 8.462938] sd 0:0:0:0: [sda] Attached SCSI removable disk
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
1[ 11.575492] procd: - early -
[ 11.579127] procd: - watchdog -

Failed to connect to ubus
[ 12.309729] procd: - watchdog -
[ 12.313075] procd: - ubus -
[ 12.371920] procd: - init -
[ 12.687161] urngd: v1.0.0 started.
[ 12.811005] kmodloader: loading kernel modules from /etc/modules.d/*
[ 12.849948] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 12.870376] cbus_baseaddr: ffff00000c000000, ddr_baseaddr: ffff800003400000, ddr_phys_baseaddr: 83400000, ddr_size: c00000
[ 12.893714] pfe_hw_init
[ 12.896176] CLASS version: 20
[ 12.905684] TMU version: 1011231
[ 12.908926] BMU1 version: 21
[ 12.917632] BMU2 version: 21
[ 12.920524] EGPI1 version: 50
[ 12.925680] EGPI2 version: 50
[ 12.928661] HGPI version: 50
[ 12.941618] HIF version: 10
[ 12.944424] HIF NOPCY version: 10
[ 12.953689] bmu_init(1) done
[ 12.956587] bmu_init(2) done
[ 12.964600] class_init() done
[ 12.991693] tmu_init() done
[ 13.001620] gpi_init(1) done
[ 13.004516] gpi_init(2) done
[ 13.012970] gpi_init(hif) done
[ 13.021710] bmu_enable(1) done
[ 13.024779] bmu_enable(2) done
[ 13.029241] pfe_hif_lib_init
[ 13.034522] pfe_hif_init
[ 13.037067] pfe_hif_alloc_descr
[ 13.046057] pfe_hif_init_buffers
[ 13.054232] pfe_firmware_init
[ 13.060582] pfe_load_elf
[ 13.065519] pe_load_ddr_section: load address(3fb0000) and elf file address(ffff00000be55000) rcvd
[ 13.130656] PFE binary version: pfe_ls1012a_slowpath_06
[ 13.145635] pfe_load_elf
[ 13.149261] pfe_ctrl_init
[ 13.157695] pfe_ctrl_init finished
[ 13.161113] pfe_eth_init
[ 13.167900] pfe 4000000.pfe: pfe_eth_mdio_init: mdc_div: 64, phy_mask: dfffffff
[ 13.182171] libphy: ls1012a MDIO Bus: probed
[ 13.223175] pfe 4000000.pfe: pfe_eth_mdio_init: mdc_div: 64, phy_mask: dfffffff
[ 13.266415] libphy: ls1012a MDIO Bus: probed
[ 13.277222] pfe_eth_init_one: No PHY or fixed-link
[ 13.287840] pfe 4000000.pfe eth0: pfe_eth_init_one: created interface, baseaddr: ffff00000c200000
[ 13.309215] pfe_phy_init interface b
[ 13.390211] pfe 4000000.pfe eth1: pfe_eth_init_one: created interface, baseaddr: ffff00000c220000
[ 13.404415] pfe_debugfs_init
[ 13.430301] cryptodev: driver 1.10 loaded.
[ 13.441818] REDv2: Loading module
[ 13.466270] pca953x 0-0022: interrupt support not compiled in
[ 13.479021] Mirror/redirect action on
[ 13.509861] u32 classifier
[ 13.512582] input device check on
[ 13.521690] Actions configured
[ 13.549233] rtl8367s-switch ls1012a-0:1d: probe RTL8367S at 0x1d on MDIO Bus ls1012a-0 (ls1012a MDIO Bus).
[ 15.417932] rtl8367s-switch ls1012a-0:1d: register interrupt 34.
[ 15.442672] usbcore: registered new interface driver cdc_acm
[ 15.457734] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 15.474344] usbcore: registered new interface driver cdc_wdm
[ 15.490030] Loading modules backported from Linux version v5.10.34-0-g0aa66717f684
[ 15.501690] Backport generated by backports.git v5.10.34-1-0-g7b5533e1
[ 15.525969] hso: drivers/net/usb/hso.c: Option Wireless
[ 15.534734] usbcore: registered new interface driver hso
[ 15.550472] usbcore: registered new interface driver ipheth
[ 15.570304] nf_conntrack version 0.5.0 (3584 buckets, 14336 max)
[ 15.589851] ctnetlink v0.93: registering with nfnetlink.
[ 15.662429] usbcore: registered new interface driver r8152
[ 15.678150] usbcore: registered new interface driver rtl8150
[ 15.693407] usbcore: registered new interface driver ums-alauda
[ 15.711106] usbcore: registered new interface driver ums-cypress
[ 15.722310] usbcore: registered new interface driver ums-datafab
[ 15.742448] usbcore: registered new interface driver ums-freecom
[ 15.757740] usbcore: registered new interface driver ums-isd200
[ 15.771473] usbcore: registered new interface driver ums-jumpshot
[ 15.787168] usbcore: registered new interface driver ums-karma
[ 15.806098] usbcore: registered new interface driver ums-sddr09
[ 15.822134] usbcore: registered new interface driver ums-sddr55
[ 15.835690] usbcore: registered new interface driver ums-usbat
[ 15.862095] usbcore: registered new interface driver usbserial
[ 15.878058] usbcore: registered new interface driver usbserial_generic
[ 15.894081] usbserial: USB Serial support registered for generic
[ 15.904083] usbcore: registered new interface driver visor
[ 15.918063] usbserial: USB Serial support registered for Handspring Visor / Palm OS
[ 15.932743] usbserial: USB Serial support registered for Sony Clie 5.0
[ 15.950002] usbserial: USB Serial support registered for Sony Clie 3.5
[ 15.965809] Driver for 1-wire Dallas network protocol.
[ 16.018260] xt_time: kernel timezone is -0000
[ 16.034145] usbcore: registered new interface driver ark3116
[ 16.046149] usbserial: USB Serial support registered for ark3116
[ 16.059020] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 16.081821] usbcore: registered new interface driver asix
[ 16.094206] usbcore: registered new interface driver belkin_sa
[ 16.104074] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[ 16.126387] usbcore: registered new interface driver cdc_eem
[ 16.141202] usbcore: registered new interface driver cdc_ether
[ 16.166207] usbcore: registered new interface driver cdc_ncm
[ 16.175883] usbcore: registered new interface driver cdc_subset
[ 16.221743] usbcore: registered new interface driver ch341
[ 16.233865] usbserial: USB Serial support registered for ch341-uart
[ 16.247405] usbcore: registered new interface driver cp210x
[ 16.259962] usbserial: USB Serial support registered for cp210x
[ 16.282147] usbcore: registered new interface driver cypress_m8
[ 16.292545] usbserial: USB Serial support registered for DeLorme Earthmate USB
[ 16.306114] usbserial: USB Serial support registered for HID->COM RS232 Adapter
[ 16.322000] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter
[ 16.369903] Ebtables v2.0 registered
[ 16.382167] usbcore: registered new interface driver ftdi_sio
[ 16.394035] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 16.414113] usbcore: registered new interface driver huawei_cdc_ncm
[ 16.432044] usbcore: registered new interface driver io_edgeport
[ 16.441671] usbserial: USB Serial support registered for Edgeport 2 port adapter
[ 16.458035] usbserial: USB Serial support registered for Edgeport 4 port adapter
[ 16.472077] usbserial: USB Serial support registered for Edgeport 8 port adapter
[ 16.489996] usbserial: USB Serial support registered for EPiC device
[ 16.508254] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.534445] usbcore: registered new interface driver kalmia
[ 16.598361] usbcore: registered new interface driver oti6858
[ 16.610002] usbserial: USB Serial support registered for oti6858
[ 16.622859] usbcore: registered new interface driver pl2303
[ 16.637984] usbserial: USB Serial support registered for pl2303
[ 16.654499] usbcore: registered new interface driver plusb
[ 16.670244] usbcore: registered new interface driver qmi_wwan
[ 16.687490] usbcore: registered new interface driver rndis_host
[ 16.710080] usbcore: registered new interface driver sierra
[ 16.722041] usbserial: USB Serial support registered for Sierra USB modem
[ 16.742400] usbcore: registered new interface driver sierra_net
[ 16.756152] usbcore: registered new interface driver ti_usb_3410_5052
[ 16.774059] usbserial: USB Serial support registered for TI USB 3410 1 port adapter
[ 16.790096] usbserial: USB Serial support registered for TI USB 5052 2 port adapter
[ 16.804757] usbcore: registered new interface driver usb_serial_simple
[ 16.818036] usbserial: USB Serial support registered for carelink
[ 16.831082] usbserial: USB Serial support registered for zio
[ 16.844267] usbserial: USB Serial support registered for funsoft
[ 16.857824] usbserial: USB Serial support registered for flashloader
[ 16.870028] usbserial: USB Serial support registered for google
[ 16.878715] usbserial: USB Serial support registered for libtransistor
[ 16.898578] usbserial: USB Serial support registered for vivopay
[ 16.912115] usbserial: USB Serial support registered for moto_modem
[ 16.926054] usbserial: USB Serial support registered for motorola_tetra
[ 16.938003] usbserial: USB Serial support registered for novatel_gps
[ 16.949877] usbserial: USB Serial support registered for hp4x
[ 16.966651] usbserial: USB Serial support registered for suunto
[ 16.980075] usbserial: USB Serial support registered for siemens_mpi
[ 17.049122] usbcore: registered new interface driver cdc_mbim
[ 17.070214] usbcore: registered new interface driver ipw
[ 17.081177] usbserial: USB Serial support registered for IPWireless converter
[ 17.101801] usbcore: registered new interface driver option
[ 17.114085] usbserial: USB Serial support registered for GSM modem (1-port)
[ 17.128643] usbcore: registered new interface driver qcserial
[ 17.142060] usbserial: USB Serial support registered for Qualcomm USB modem
[ 17.154906] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 23.562217] pfe 4000000.pfe eth0: pfe_eth_open
[ 23.573858] hif_process_client_req: register client_id 0
[ 23.579203] pfe_hif_client_register
[ 23.589667] pfe 4000000.pfe eth0: pfe_gemac_init
[ 23.611767] pfe 4000000.pfe eth1: pfe_eth_open
[ 23.625847] hif_process_client_req: register client_id 1
[ 23.631198] pfe_hif_client_register
[ 23.650678] pfe 4000000.pfe eth1: pfe_gemac_init
[ 24.252837] Loading modules backported from Linux version v5.10.34-0-g0aa66717f684
[ 24.260675] Backport generated by backports.git v5.10.34-1-0-g7b5533e1
[ 24.678440] pfe 4000000.pfe eth1: Link is Up - 100Mbps/Full - flow control off
[ 32.105116] pfe 4000000.pfe eth0: pfe_eth_shutdown
[ 32.121656] hif_lib_client_unregister : client: ffff800000ee88c8, client_id: 0, txQ_depth: 2048, rxQ_depth: 256
[ 32.141694] hif_process_client_req: unregister client_id 0
[ 32.147213] pfe_hif_client_unregister
[ 32.189364] pfe 4000000.pfe eth1: pfe_eth_shutdown
[ 32.205691] hif_lib_client_unregister : client: ffff800015c348c8, client_id: 1, txQ_depth: 2048, rxQ_depth: 256
[ 32.217452] hif_process_client_req: unregister client_id 1
[ 32.223001] pfe_hif_client_unregister
[ 32.869615] pfe 4000000.pfe eth1: Link is Down
[ 34.532323] pfe 4000000.pfe eth0: pfe_eth_open
[ 34.541918] hif_process_client_req: register client_id 0
[ 34.547266] pfe_hif_client_register
[ 34.557085] pfe 4000000.pfe eth0: pfe_gemac_init
[ 34.571135] br-lan: port 1(eth0) entered blocking state
[ 34.592339] br-lan: port 1(eth0) entered disabled state
[ 34.602373] device eth0 entered promiscuous mode
[ 34.610470] br-lan: port 1(eth0) entered blocking state
[ 34.615754] br-lan: port 1(eth0) entered forwarding state
[ 34.628287] pfe 4000000.pfe eth1: pfe_eth_open
[ 34.637869] hif_process_client_req: register client_id 1
[ 34.643217] pfe_hif_client_register
[ 34.652536] pfe 4000000.pfe eth1: pfe_gemac_init
[ 35.686687] pfe 4000000.pfe eth1: Link is Up - 100Mbps/Full - flow control off
[ 48.174395] br-lan: port 2(redc0) entered blocking state
[ 48.179803] br-lan: port 2(redc0) entered disabled state
[ 48.186029] device redc0 entered promiscuous mode
[ 48.190869] br-lan: port 2(redc0) entered blocking state
[ 48.196211] br-lan: port 2(redc0) entered forwarding state
[ 247.022521] br-lan: port 2(redc0) entered disabled state
[ 247.027913] br-lan: port 1(eth0) entered disabled state
[ 247.038042] device eth0 left promiscuous mode
[ 247.046530] br-lan: port 1(eth0) entered disabled state
[ 247.068288] pfe 4000000.pfe eth0: pfe_eth_shutdown
[ 247.082337] hif_lib_client_unregister : client: ffff800000ee88c8, client_id: 0, txQ_depth: 2048, rxQ_depth: 256
[ 247.092456] hif_process_client_req: unregister client_id 0
[ 247.097957] pfe_hif_client_unregister
[ 247.103170] device redc0 left promiscuous mode
[ 247.107685] br-lan: port 2(redc0) entered disabled state
[ 247.253145] pfe 4000000.pfe eth1: pfe_eth_shutdown
[ 247.269059] hif_lib_client_unregister : client: ffff800015c348c8, client_id: 1, txQ_depth: 2048, rxQ_depth: 256
[ 247.286072] hif_process_client_req: unregister client_id 1
[ 247.291617] pfe_hif_client_unregister
[ 247.594308] pfe 4000000.pfe eth1: Link is Down
[ 248.462248] UBIFS (ubi0:1): un-mount UBI device 0
[ 248.467043] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[ 248.502294] UBIFS (ubi0:0): un-mount UBI device 0
[ 248.507068] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" stops
[ 251.806498] imx2-wdt 2ad0000.wdog: Device shutdown: Expect reboot!
[ 251.812791] reboot: Restarting system
INFO: PSCI Power Domain Map:
INFO: Domain Node : Level 2, parent_node -1, State ON (0x0)
INFO: Domain Node : Level 1, parent_node 0, State ON (0x0)
INFO: CPU Node : MPID 0x0, parent_node 1, State ON (0x0)INFO: BOOT SRC is QSPI
NOTICE: DDR Init Done
NOTICE: BL2: v1.5(release):redfw_3.0.000-3-g74a78d4e8
NOTICE: BL2: Built : 05:30:45, Apr 23 2020
INFO: BL2: Doing platform setup
INFO: BL2: Loading image id 3
INFO: Loading image id=3 at address 0x9be00000
INFO: Image id=3 loaded: 0x9be00000 - 0x9be0b631
INFO: BL2: Loading image id 5
INFO: Loading image id=5 at address 0x82000000
INFO: Image id=5 loaded: 0x82000000 - 0x820bec6c
NOTICE: BL2: Booting BL31
INFO: Entry point address = 0x9be00000
NOTICE: BL31: v1.5(release):redfw_3.0.000-3-g74a78d4e8
NOTICE: BL31: Built : 05:30:45, Apr 23 2020
NOTICE: Welcome to LS1012 BL31 Phase
INFO: ARM GICv2 driver initialized
INFO: BL31: Initializing runtime services
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x82000000
INFO: SPSR = 0x3c9

U-Boot 2018.09 (Apr 23 2020 - 05:30:45 +0000), Build: jenkins-Red_Unified_Firmware_v3-86

SoC: LS1012AE Rev2.0 (0x87040020)
Clock Configuration:
CPU0(A53):800 MHz
Bus: 250 MHz DDR: 1000 MT/s
Reset Configuration Word (RCW):
00000000: 08000008 00000000 00000000 00000000
00000010: 35080000 c000000c 40000000 00001800
00000020: 00000000 00000000 00000000 00014172
00000030: 00000000 00428120 00000096 00000000
I2C: ready
DRAM: 446 MiB
WARNING: Calling __hwconfig without a buffer and before environment is ready
Using SERDES1 Protocol: 13576 (0x3508)
MMC: FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from SPI Flash... SF: Recognized JEDEC id bytes: ef, 60, 15
SF: Detected w25q16dw with page size 256 Bytes, erase size 4 KiB, total 2 MiB
SPI NAND PROBE!
SF: Recognized JEDEC id bytes: ef, bb, 21
SF: CONFIG_SPL_BUILD Detected W25N01GW with page size 2 KiB, erase size 128 KiB, total 128 MiB
spi_flash_scan: Printf SR1 = 0x0, SR2 = 0x18, SR3 = 0x0
spi_flash_scan: MAX READ SIZE = 0x40, MAX WRITE SIZE = 0x20
Probe over!
OK
In: serial
Out: serial
Err: serial
Model: SOPHOS RED20 Board
Board: SOPHOS RED20
HW: RevC
MCU Version: 8
Net: PFE class pe firmware
PFE tmu pe firmware
eth0: pfe_eth0, eth1: pfe_eth1
starting Image2...
SF: Recognized JEDEC id bytes: ef, 60, 15
SF: Detected w25q16dw with page size 256 Bytes, erase size 4 KiB, total 2 MiB
SPI NAND PROBE!
SF: Recognized JEDEC id bytes: ef, bb, 21
SF: CONFIG_SPL_BUILD Detected W25N01GW with page size 2 KiB, erase size 128 KiB, total 128 MiB
spi_flash_scan: Printf SR1 = 0x0, SR2 = 0x18, SR3 = 0x0
spi_flash_scan: MAX READ SIZE = 0x40, MAX WRITE SIZE = 0x20
Probe over!
device 0 offset 0x3000000, size 0xdc9139
do_spi_nand_flash_read_write: Choice read or write, nand_read
SF: Start read address confirm good block @ 0x3000000..
SF: 14455097 bytes @ 0x3000000 Read: OK
device 0 offset 0x2f00000, size 0x4353
do_spi_nand_flash_read_write: Choice read or write, nand_read
SF: Start read address confirm good block @ 0x2F00000..
SF: 17235 bytes @ 0x2f00000 Read: OK
Stop PFE...
Stopping PFE...
starting openwrt ...
## Booting kernel from Legacy Image at 81000000 ...
Image Name: ARM64 RED Unified Firmware Linux
Image Type: AArch64 Linux Kernel Image (gzip compressed)
Data Size: 14455033 Bytes = 13.8 MiB
Load Address: 80080000
Entry Point: 80080000
Verifying Checksum ... OK
## Flattened Device Tree blob at 80000000
Booting using the fdt blob at 0x80000000
Uncompressing Kernel Image ... OK
Loading Device Tree to 00000000979ec000, end 00000000979f3352 ... OK
WARNING: fdt_fixup_stdout: could not read serial0 alias: FDT_ERR_NOTFOUND
INFO: Instantiating the HW RNG
INFO: RNG Desc SUCCESS with status 0
NOTICE: RNG: INSTANTIATED
INFO: RNG Desc SUCCESS with status 0
INFO: result f276fd317b10e39d
PCIe0: pcie@3400000 Root Complex: no link

Starting kernel ...

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.142 (jenkins@abn-nsgci-old2) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 1-1225-48bdbfdac-b1551d2)) #0 SMP PREEMPT Thu Jun 23 09:16:22 2022
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] Machine model: Sophos RED20
[ 0.000000] earlycon: uart8250 at MMIO 0x00000000021c0500 (options '')
[ 0.000000] bootconsole [uart8250] enabled
[ 0.000000] cma: Reserved 16 MiB at 0x000000009ac00000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000009bdfffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x9bdda680-0x9bddbe3f]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x000000009bdfffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x000000009bdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009bdfffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] random: get_random_bytes called from start_kernel+0x84/0x404 with crng_init=0
[ 0.000000] percpu: Embedded 21 pages/cpu s48664 r8192 d29160 u86016
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] Speculative Store Bypass Disable mitigation not required
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 112392
[ 0.000000] Policy zone: DMA
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 redd boot_load_from=image2 mcu_resetpb_time=0
[ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.000000] Memory: 389684K/456704K available (8062K kernel code, 828K rwdata, 2368K rodata, 9472K init, 848K bss, 50636K reserved, 16384K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
[ 0.000000] .text : 0xffff000008080000 - 0xffff000008860000 ( 8064 KB)
[ 0.000000] .rodata : 0xffff000008860000 - 0xffff000008ac0000 ( 2432 KB)
[ 0.000000] .init : 0xffff000008ac0000 - 0xffff000009400000 ( 9472 KB)
[ 0.000000] .data : 0xffff000009400000 - 0xffff0000094cf008 ( 829 KB)
[ 0.000000] .bss : 0xffff0000094cf008 - 0xffff0000095a3160 ( 849 KB)
[ 0.000000] fixed : 0xffff7dfffe7fb000 - 0xffff7dfffec00000 ( 4116 KB)
[ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
[ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
[ 0.000000] 0xffff7e0000000000 - 0xffff7e00006f8000 ( 6 MB actual)
[ 0.000000] memory : 0xffff800000000000 - 0xffff80001be00000 ( 446 MB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[ 0.000005] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[ 0.008575] Console: colour dummy device 80x25
[ 0.013129] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)
[ 0.023587] pid_max: default: 32768 minimum: 301
[ 0.028722] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.035937] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.042905] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.049595] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.072799] ASID allocator initialised with 32768 entries
[ 0.086286] Hierarchical SRCU implementation.
[ 0.106759] smp: Bringing up secondary CPUs ...
[ 0.111356] smp: Brought up 1 node, 1 CPU
[ 0.115406] SMP: Total of 1 processors activated.
[ 0.120161] CPU features: detected feature: 32-bit EL0 Support
[ 0.126053] CPU features: detected feature: Kernel page table isolation (KPTI)
[ 0.139278] CPU: All CPU(s) started at EL2
[ 0.143424] alternatives: patching kernel code
[ 0.156505] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.166406] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.174403] NET: Registered protocol family 16
[ 0.183141] cpuidle: using governor menu
[ 0.187778] vdso: 2 pages (1 code @ ffff000008864000, 1 data @ ffff000009405000)
[ 0.196563] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.203076] Serial: AMBA PL011 UART driver
[ 0.209899] Machine: Sophos RED20
[ 0.214018] SoC family: QorIQ LS1012A
[ 0.217769] SoC ID: svr:0x87040020, Revision: 2.0
[ 0.259638] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.281389] RCPM: layerscape_rcpm_init: The RCPM driver initialized.
[ 0.291834] vgaarb: loaded
[ 0.295305] SCSI subsystem initialized
[ 0.304236] imx-i2c 2180000.i2c: fsl-scl-gpio not found
[ 0.310600] imx-i2c 2180000.i2c: can't get pinctrl, bus recovery not supported
[ 0.318600] i2c i2c-0: IMX I2C adapter registered
[ 0.323798] imx-i2c 2190000.i2c: fsl-scl-gpio not found
[ 0.329330] imx-i2c 2190000.i2c: can't get pinctrl, bus recovery not supported
[ 0.336913] i2c i2c-1: IMX I2C adapter registered
[ 0.342120] pps_core: LinuxPPS API ver. 1 registered
[ 0.347309] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.356626] PTP clock support registered
[ 0.361274] No BMan portals available!
[ 0.365878] QMan: Allocated lookup table at ffff000009ff5000, entry count 65537
[ 0.373536] No QMan portals available!
[ 0.377668] No USDPAA memory, no 'fsl,usdpaa-mem' in device-tree
[ 0.385570] clocksource: Switched to clocksource arch_sys_counter
[ 0.392126] VFS: Disk quotas dquot_6.6.0
[ 0.396205] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.418341] NET: Registered protocol family 2
[ 0.423938] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.431180] TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
[ 0.437861] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.444422] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.450358] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.456878] NET: Registered protocol family 1
[ 4.510273] audit: initializing netlink subsys (disabled)
[ 4.516932] No memory allocated for crashlog
[ 4.521632] audit: type=2000 audit(4.412:1): state=initialized audit_enabled=0 res=1
[ 4.529684] workingset: timestamp_bits=44 max_order=17 bucket_order=0
[ 4.536642] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 4.542565] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 4.552874] fuse init (API version 7.26)
[ 4.570923] NET: Registered protocol family 38
[ 4.575734] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 4.583313] io scheduler noop registered
[ 4.587384] io scheduler cfq registered (default)
[ 4.593869] OF: PCI: host bridge /soc/pcie@3400000 ranges:
[ 4.600029] OF: PCI: IO 0x4000010000..0x400001ffff -> 0x00000000
[ 4.606409] OF: PCI: MEM 0x4040000000..0x407fffffff -> 0x40000000
[ 4.613123] layerscape-pcie 3400000.pcie: PCI host bridge to bus 0000:00
[ 4.620071] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 4.625639] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 4.631908] pci_bus 0000:00: root bus resource [mem 0x4040000000-0x407fffffff] (bus address [0x40000000-0x7fffffff])
[ 4.643180] pci 0000:00:00.0: BAR 6: assigned [mem 0x4040000000-0x40400007ff pref]
[ 4.650970] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 4.656683] pcieport 0000:00:00.0: Signaling PME with IRQ 25
[ 4.662765] pcieport 0000:00:00.0: AER enabled with IRQ 24
[ 4.670733] Freescale LS2 console driver
[ 4.676072] fsl-ls2-console: device fsl_mc_console registered
[ 4.682161] fsl-ls2-console: device fsl_aiop_console registered
[ 4.694134] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.703968] console [ttyS0] disabled
[ 4.708410] 21c0500.serial: ttyS0 at MMIO 0x21c0500 (irq = 15, base_baud = 7812500) is a 16550A
[ 4.717350] console [ttyS0] enabled
[ 4.717350] console [ttyS0] enabled
[ 4.724462] bootconsole [uart8250] disabled
[ 4.724462] bootconsole [uart8250] disabled
[ 4.734613] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 4.755554] brd: module loaded
[ 4.765078] loop: module loaded
[ 4.769990] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 4.781628] random: fast init done
[ 4.789540] fsl-quadspi 1550000.quadspi: w25q16dw (2048 Kbytes)
[ 4.795547] 7 fixed-partitions partitions found on MTD device 1550000.quadspi
[ 4.802731] Creating 7 MTD partitions on "1550000.quadspi":
[ 4.808330] 0x000000000000-0x000000020000 : "rcw"
[ 4.814208] 0x000000020000-0x000000060000 : "pfe"
[ 4.820156] 0x000000060000-0x000000160000 : "uboot"
[ 4.826368] 0x000000160000-0x0000001d0000 : "free1"
[ 4.832616] 0x0000001d0000-0x0000001e0000 : "uboot-env"
[ 4.839112] 0x0000001e0000-0x0000001f0000 : "reserved1"
[ 4.845774] 0x0000001f0000-0x000000200000 : "free2"
[ 4.851986] fsl-quadspi 1550000.quadspi: Get new node in dts...
[ 4.858233] fsl-quadspi 1550000.quadspi: Start probing NAND, initial the struct...
[ 4.867018] fsl-quadspi 1550000.quadspi: SET SPI NAND SR1 = 0x00, SR2 = 0x18, Flash unprotect and set buf mode...
[ 4.877394] fsl-quadspi 1550000.quadspi: If you don't use Winbond SPI NAND Flash, please check the code in driver...
[ 4.888155] fsl-quadspi 1550000.quadspi: Confirm SPI NAND SR, Read SR1 = 0x00, SR2 = 0x18, SR3 = 0x00
[ 4.897421] fsl-quadspi 1550000.quadspi: Initial ok, start hook function...
[ 4.904410] fsl-quadspi 1550000.quadspi: Hook ok, start initial MTD...
[ 4.910960] fsl-quadspi 1550000.quadspi: MTD name default = 1550000.quadspi, change to new name...quadspinand
[ 4.920903] fsl-quadspi 1550000.quadspi: Do nand scan...
[ 4.926668] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xbb
[ 4.933043] nand: Winbond Winbond 1G 1.8V 8-bit
[ 4.937617] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 4.945222] Scanning device for bad blocks
[ 5.109054] random: crng init done
[ 5.133000] fsl-quadspi 1550000.quadspi: MTD initial ok...
[ 5.138559] 10 fixed-partitions partitions found on MTD device quadspinand
[ 5.145457] Creating 10 MTD partitions on "quadspinand":
[ 5.150794] 0x000000000000-0x000000100000 : "self"
[ 5.156639] 0x000000100000-0x000000200000 : "free1"
[ 5.162762] 0x000000200000-0x000000300000 : "fdt1"
[ 5.168838] 0x000000300000-0x000002b00000 : "uimage1"
[ 5.175323] 0x000002b00000-0x000002f00000 : "free2"
[ 5.181708] 0x000002f00000-0x000003000000 : "fdt2"
[ 5.187803] 0x000003000000-0x000005800000 : "uimage2"
[ 5.194371] 0x000005800000-0x000005c00000 : "free3"
[ 5.