Guest User!

You are not Sophos Staff.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 2 replies
  • Subscribers 26 subscribers
  • Views 1029 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Firewall Restore via CLI

jspanitz

A NAT rule has made the firewall admin ui inaccessible. Firewall still passes traffic and CLI is accessible via local console. How can we restore / revert to the last previsou backup via CLI?



This thread was automatically locked due to age.
Parents
  • +1

    Hi jspanitz,

    Thank you for contacting Sophos Community. You may try the following command on CLI.

    Go to Device Console (4) and type system appliance_access enable.

    This will enable you to access GUI and disable all restriction, but as a CAUTION, this will "DISABLE ALL TRAFFIC" to the FW

    After the changes, Kindly remember to DISABLE it again by doing the command below

    system appliance_access disable

    Kindly refer to the following KB below.

    support.sophos.com/.../KB-000038694

Reply
  • +1

    Hi jspanitz,

    Thank you for contacting Sophos Community. You may try the following command on CLI.

    Go to Device Console (4) and type system appliance_access enable.

    This will enable you to access GUI and disable all restriction, but as a CAUTION, this will "DISABLE ALL TRAFFIC" to the FW

    After the changes, Kindly remember to DISABLE it again by doing the command below

    system appliance_access disable

    Kindly refer to the following KB below.

    support.sophos.com/.../KB-000038694

Children