Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Route problem on XGS116 firewall

Hello,

I'm stuck on a LAN routing problem.

We changed our UTM firewall to XGS116, I recreated the rules and configuration on the new firewall, but I have a problem with the incoming traffic to the internal network.

We have several offices that are interconnected by MPLS.

From the other offices I can no longer reach the head office network, but I can reach the subnet

Here is a diagram and the static routes.

Can you please help me ^^



This thread was automatically locked due to age.
Parents
  • Could you please explain a bit better. Is the Head Office Network behind the Sophos? (I'm assuming that the red arrows indicate you can't get there, but I also assume that "there" is to the right of the Sophos.) Or are you saying you can't ssh to the Sophos itself, which would not be a routing issue.

    I'm assuming that 192.168.0.3 (Port "Internal") is the Gateway for your Sophos? (By IP address, the switch appears to be your peer, but you draw a line from the Switch to the Sophos rather than from the Router to the Sophos, so I'm confused.)

Reply
  • Could you please explain a bit better. Is the Head Office Network behind the Sophos? (I'm assuming that the red arrows indicate you can't get there, but I also assume that "there" is to the right of the Sophos.) Or are you saying you can't ssh to the Sophos itself, which would not be a routing issue.

    I'm assuming that 192.168.0.3 (Port "Internal") is the Gateway for your Sophos? (By IP address, the switch appears to be your peer, but you draw a line from the Switch to the Sophos rather than from the Router to the Sophos, so I'm confused.)

Children
No Data