Guest User!

You are not Sophos Staff.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 5 replies
  • Answers 1 answer
  • Subscribers 28 subscribers
  • Views 523 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Can't access network and internet

manjunath naganna

We have 5 firewall in different location and each firewall have different local IP address. 

Unit 1 has 192.168.1.1 and

Unit 2 has 192.168.2.1 and 

Unit 3 has 192.168.3.1 and so on.

And if I take a laptop from Unit 1, which has IP range 192.168.1.1 - 255 (for example 192.168.1.100) and connect it in the Unit 2, the laptop cant connect to internet and access any other system on the network.

Is there any configuration needs to be done in order for this to work?....



This thread was automatically locked due to age.
Parents
  • 0

    How are the addresses assigned? The issue will be if you are using XG dhcp the original address assignment is still active and you will not be assigned a.ip address for the new network connection.

    ian

    XG115W - v19.5.1 mr-1 - Home

    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to rfcat_vk

    IP address are assigned statically. And I don't want new address for new network connection. I want to use the same local IP for both Unit 1 and Unit 2 networks. for example, if I assign IP 192.168.1.100 to a system which is in Unit 2, which has 192.168.2.1 gateway,  it should work...

Reply
  • 0 in reply to rfcat_vk

    IP address are assigned statically. And I don't want new address for new network connection. I want to use the same local IP for both Unit 1 and Unit 2 networks. for example, if I assign IP 192.168.1.100 to a system which is in Unit 2, which has 192.168.2.1 gateway,  it should work...

Children
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?