Guest User!

You are not Sophos Staff.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 4 replies
  • Answers 3 answers
  • Subscribers 27 subscribers
  • Views 735 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Routing Problem with Sophos XG

Oliver Wamsler1

Hello,

i have a problem and i hope you can help me:

1) I have a zone called >RED, with my REDs in branch offices (Ip-network: 192.168.41.1/24)

2) I have some  destinitions which are connected with IP-Sec connections (IP-Network: 172.30.200.0/24)

My problem: A notebook in a branch office (192.168.41.101) want to connect to a destinition which located in IP-Sec-connection.

I think i have to make a static routing and make a rule in the firewall. But i make a mistake i think.

Thanks



This thread was automatically locked due to age.
Parents
  • 0

    Hi Oliver,

    Thank you for your query, So you have RED tunnel ? 
    Which wants to communicate over the IPsec tunnel ?

    Under the IPsec connection have you mentioned the RED network under the local network and on the remote location RED network as the remote network?

    Do you have a rule in place for the traffic RED to VPN and VPN to RED ?

    Can you Monitor traffic using Packet Capture Utility : https://support.sophos.com/support/s/article/KB-000035761?language=en_US ?

    And from the console, can you verify whether the traffic is going into the IPsec connection ?
    from the console>  system diagnostics utilities route lookup <ipsec network ip address> 

    Thanks & Regards,
    _______________________________________________________________

    Vivek Jagad | Team Lead, Global Support & Services 


    Sophos Community | Product Documentation | Sophos Techvids | SMS
    If a post solves your question please use the 'Verify Answer' button.

  • 0 in reply to Vivek Jagad

    Hello,

    yes i have red tunnels. 

    I want to communicate from a notebook in a RED-brunch office to destination in one/all IP-Sec-connections. The XG will not route the traffic from the Red to the destination.

    Thanks. I have only made rules RED to LAN and RED to WAN and Lan to RED.

    Thats seems to be my problem.

Reply
  • 0 in reply to Vivek Jagad

    Hello,

    yes i have red tunnels. 

    I want to communicate from a notebook in a RED-brunch office to destination in one/all IP-Sec-connections. The XG will not route the traffic from the Red to the destination.

    Thanks. I have only made rules RED to LAN and RED to WAN and Lan to RED.

    Thats seems to be my problem.

Children
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?