Guest User!

You are not Sophos Staff.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 5 replies
  • Subscribers 31 subscribers
  • Views 746 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Urgent port Failure need Command to change manage Lan port

lenyick

Manage port has failed and i cannot access to remote into  XG can someone 

list the command needed to switch from port 1 to port 3 in at the console 

thank you



Edited TAGs
[edited by: emmosophos at 6:10 PM (GMT -7) on 11 May 2022]
[locked by: emmosophos at 3:41 PM (GMT -7) on 27 Jul 2022]
Parents
  • 0

    Like

    says but if the Ports are in different Zones the only way would be through the CLI Direct Attach. (RJ45 or USB MiniB to USB A [Should be one with the Firewall]).

    To make sure something like that does not happen and you lock yourself out -> Use Sophos Central. 

    But there are times where even that does not help. Managed to lock myself out with a Global NAT Rule - Had to CLI to the Firewall and delete the Rule over the Advanced Shell (Postgre DB). ^^

    Best regards

    Sig.

Reply
  • 0

    Like

    says but if the Ports are in different Zones the only way would be through the CLI Direct Attach. (RJ45 or USB MiniB to USB A [Should be one with the Firewall]).

    To make sure something like that does not happen and you lock yourself out -> Use Sophos Central. 

    But there are times where even that does not help. Managed to lock myself out with a Global NAT Rule - Had to CLI to the Firewall and delete the Rule over the Advanced Shell (Postgre DB). ^^

    Best regards

    Sig.

Children
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?

Unfiltered HTML