Hi, I have one problem with my webserver.
It´s an VM, with only a public IP, so no internal private IP, that it can be translated to.
I set up firewall XG from ground, since I was expecting problems with one VLAN, that wasn´t accessable anymore, even after restoring a working backup.
So now, VLANs are working, telephone server is working, which has a internal IP nad a public IP, which is NATed, but for the webserver that isn´t possible.
The Firewall shows in Logs, that Traffic comes in and also is allowed, but there is no traffic going from webserver out to the web.
Firewall for this IP iset up as followed
Here that public IP config as an example:
Webserver 81.200.178.83
Tel-Server 81.200.178.84
Incoming Traffic:
Source: Any - Any
Destination: Any - Webserver (public IP)
Outgoing Traffic:
Source: Any - Webserver
Destination: Any - Any
NAT is linked for both rules.
Here comes the miracle:
On old config these rules work, but as I wrote, one VLAN is completely dead, even creating it from scratch doesn´t work, but Webserver is working fine, with config from above.
On the new config, VLAN is working, but Webserver not, both is set up identical on old and new config.
Someone has an Idea, what I can try to make the webserver accessable again?
On old cisco hardware this IP range from public IP´s is NAT outside, if this helps.
I´m trying to analyse and fix that old problems on new sophos hardware, since my predecessor built all that stuff a little bit crazy on cisco
This thread was automatically locked due to age.