Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 12 replies
  • Subscribers 28 subscribers
  • Views 804 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ALLOW A FIREWALL CONNECTED BY LAN TO SOPHOS XG

hpdc-itdept

NETWORK DIAGRAM

I would like to ask how to set up this network. I need to allow the server to access the internet located behind a firewall.
Appreciate your efforts. Thanks



This thread was automatically locked due to age.
Parents
  • 0

    Hi, 

    are you asking about incoming traffic to the server or just putting?

    The XG would be on an untagged port of the VLAN 13 of the switch. What IP address does the server present to the XG? The firewall rule would be similar to this

    source LAN, network the network associated with VLAN 13, destination WAN, network ANY, services (HTTPS, DNS etc)m allow, log. To refine the rule you could create a clientless user for the server and us that name in the allow access in the firewall rule.

    Ian

  • 0 in reply to rfcat_vk

    Also I would like to add firewall has been setup to NAT and also the 172.16.1.0 network is dhcp. from the server it can ping to vlan 13 with ip 10.10.13.1 but not the sophos xg. 

  • 0 in reply to hpdc-itdept

    What is the address of the XG port? Have you allowed ping through the sonicwall? Is the XG connected to an untagged port on the switch, assuming the vlan is controlled by the sonicwall?

    ian

Reply Children