Guest User!

You are not Sophos Staff.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 9 replies
  • Answers 1 answer
  • Subscribers 28 subscribers
  • Views 1263 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Allow external ip

Nicolas DOY 
I cannot allow traffic from an external ip and a specific port to my local server. I tried differents things but it doesn't work.




This thread was automatically locked due to age.
Parents
  • 0

    Hello Nicolas,

    As mentioned by Rfcat please be more specific on your setup.

    However, by the screenshots, you shared, under Destination host/Network I see a Private IP, usually, you would select the Port2 WAN to interface IP that has your public IP, if Port1 is your WAN interface, then make sure you’re allowing the traffic on that specific port, otherwise, the XG will never see the traffic.

    Also please share a screenshot of the API_CSE service you created.

    Regards,

  • 0 in reply to emmosophos

    Hi, thanks for your return, i'm going to be more explicit. First i don't know if i have to create a rule user network or application. Under API_CSE i have the protocol tcp and the port detination 3001 (see picture capture3.png). The private IP is set on the variable IP_API_CSE_ISCA (host ip).
    The port1 is the LAN and i don't know how to set or check it.
    Do you nedd more information ?

    Thanks everyone.

Reply
  • 0 in reply to emmosophos

    Hi, thanks for your return, i'm going to be more explicit. First i don't know if i have to create a rule user network or application. Under API_CSE i have the protocol tcp and the port detination 3001 (see picture capture3.png). The private IP is set on the variable IP_API_CSE_ISCA (host ip).
    The port1 is the LAN and i don't know how to set or check it.
    Do you nedd more information ?

    Thanks everyone.

Children
No Data