Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 11 replies
  • Subscribers 28 subscribers
  • Views 1334 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XG in MTA mode and 3 WAN-Interfaces ... unable to select the correct outbound interface

dirkkotte

Hi,

configured XG 18.0.4 in MTA mode to send outgoing mail using a single interface.

But XG use another interface ...

i have 3 Gateways ... SMTP should use GW_WAN


Some hints where the error could be?

Thanks,

Dirk



This thread was automatically locked due to age.
Parents
  • 0

    Which Interface does the XG use? 

    __________________________________________________________________________________________________________________

  • 0 in reply to LuCar Toni

    DSL1


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

  • 0 in reply to dirkkotte

    It uses the IP and the Interface or only the IP and the correct Interface? 

    Because you need NAT and SD-WAN PBR. 

    Maybe you need a Firewall Rule. Check if there is a MTA Rule. 

    __________________________________________________________________________________________________________________

  • 0 in reply to LuCar Toni

    It use the incorrect interface.

    i have the firewall-rules (and they matches while sending Mails)
    my configuration for SD-WAN PBR ist shown in the screenshot.
    i have a default-masq rule for all outgouing traffic/interfaces...


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Reply
  • 0 in reply to LuCar Toni

    It use the incorrect interface.

    i have the firewall-rules (and they matches while sending Mails)
    my configuration for SD-WAN PBR ist shown in the screenshot.
    i have a default-masq rule for all outgouing traffic/interfaces...


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Children
Cookie Information Banner