Guest User!

You are not Sophos Staff.

Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 23 replies
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 3533 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Silent Audio Calls

David Jumbi

Hi I have a Sophos XG-125 (new deployment). I am having silent calls from one extension to another within the organization. SIP works fine as the call can be placed and received but the media isn't going through (RTP not somehow not flowing). I have tried both system system_modules sip load and system system_modules sip unload commands but there was no change. Anyone has a solution to this its really bugging me.



This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to David Jumbi

    Hello David,

    Thank you for contacting the Sophos Community.

    Adding to what Rfcat and Luca have mentioned, also check for entries on DoS.

    Go to Intrusion Prevention >> DoS & Spoof protection >> if it’s enabled try disabling.

    If the issue remain SSH to XG (5>4)  and you’ll end in the console:

    console> drop-packet-capture 'host x.x.x.x' (Where x.x.x.x is the IP of one of the phones) Check if you find any drop packets for VoIP connections. 

    Regards,

  • 0 in reply to emmosophos

    Thanks Emmanuel , I'll give feedback once I'm able o do this , please bear with as I will need test windows to do this , which is not easy to get 

  • 0 in reply to emmosophos

    Hi Manuel DoS & Spoof protection was already disabled , I'm yet to try the drop packet capture as I havent been able to get the firewall back to production since the call center runs 24/7. Getting a test window is a bit hectic , I'll respond once I'm able to do this

  • 0 in reply to emmosophos

    Hi so when I drop-packet-capture 'host PHONE_IP_ADDRESS'  I'm seeing a very weird scenario. When I place the call there's nothing on the output but when I pick the call I see a lot activity on the packet capture. So does this mean SIP is just going via the switch but RTP is somehow being forced through the firewall?