Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 26 subscribers
  • Views 219 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SG310 XG v17 SSL Remote Access & IPsec Site to Site via WAN 2 Only.

Eric Lim1

Recently added a new PortE4 WAN interface(PPPoE) as Primary(Active) & Edited existing PortE1 WAN interface as Backup
Added static route 0.0.0.0 / 0.0.0.0 gateway for PortE4 with distance 0
Edited existing static route 0.0.0.0 / 0.0.0.0 gateway for PortE1 with distance 10

All LAN to WAN traffic works well.

Existing Remote Access SSL & IPSec Site to Site connection failed. Once i change the Static route distance of PortE1 lower then PortE1 both VPN will be back alive.

Objective is to use PortE4 as WAN Internet, PortE1 as Backup Internet & all VPN connectivity(site to site & Remote access SSL)

Anyone has any guide on this?



This thread was automatically locked due to age.
Parents
  • 0
    Eric Lim1 said:

    Recently added a new PortE4 WAN interface(PPPoE) as Primary(Active) & Edited existing PortE1 WAN interface as Backup
    Added static route 0.0.0.0 / 0.0.0.0 gateway for PortE4 with distance 0
    Edited existing static route 0.0.0.0 / 0.0.0.0 gateway for PortE1 with distance 10

    All LAN to WAN traffic works well.

    Existing Remote Access SSL & IPSec Site to Site connection failed. Once i change the Static route distance of PortE1 lower then PortE1 both VPN will be back alive.

    Objective is to use PortE4 as WAN Internet, PortE1 as Backup Internet & all VPN connectivity(site to site & Remote access SSL)

    Anyone has any guide on this?

    sorry for typo. Once i change the Static route distance of PortE1 lower then PortE4 both VPN will be back alive.

Reply
  • 0
    Eric Lim1 said:

    Recently added a new PortE4 WAN interface(PPPoE) as Primary(Active) & Edited existing PortE1 WAN interface as Backup
    Added static route 0.0.0.0 / 0.0.0.0 gateway for PortE4 with distance 0
    Edited existing static route 0.0.0.0 / 0.0.0.0 gateway for PortE1 with distance 10

    All LAN to WAN traffic works well.

    Existing Remote Access SSL & IPSec Site to Site connection failed. Once i change the Static route distance of PortE1 lower then PortE1 both VPN will be back alive.

    Objective is to use PortE4 as WAN Internet, PortE1 as Backup Internet & all VPN connectivity(site to site & Remote access SSL)

    Anyone has any guide on this?

    sorry for typo. Once i change the Static route distance of PortE1 lower then PortE4 both VPN will be back alive.

Children
No Data