Guest User!

You are not Sophos Staff.

Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 26 subscribers
  • Views 505 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SSLVPN to reach device behind WAN interface devices

ywillie

Hi.

I've tried to allow SSLVPN connections remotely to one of our Interface behind a router . It did not work out.



What works.
1.SSLVPN is fully functional for other subnets. (Except for 192.168.0.0/24)
2.Subnets behind PORT:A8 192.168.98.1/30 can ping devices after 192.168.0.0/24 internally.

What didn't work
1.Remotely SSLVPN connections cannot ping subnets behind interface A5: 192.168.0.2 including the interface as well.

I've tried installed SSLVPN over my home pc and tried to ping devices at 192.168.0.0 subnets and none worked.

Here's the picture of the setups.

Network Diagram

Interface Menu

Interface General Settings Port A5

Firewall Rule

SSLVPN Remote



This thread was automatically locked due to age.
Parents
  • FormerMember
    0 FormerMember

    Hi ,

    Thanks for reaching out to the Community! 

    The PortA5 network zone is configured as WAN, and the firewall rule isn’t configured to allow traffic from the VPN zone to the WAN zone. 

    Try to add a WAN zone in the destination zone and see if that works. 

    Thanks,

Reply
  • FormerMember
    0 FormerMember

    Hi ,

    Thanks for reaching out to the Community! 

    The PortA5 network zone is configured as WAN, and the firewall rule isn’t configured to allow traffic from the VPN zone to the WAN zone. 

    Try to add a WAN zone in the destination zone and see if that works. 

    Thanks,

Children