Guest User!

You are not Sophos Staff.

This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Two WAN Lines

Hi, i ran into a weird problem. We have two DSL-Lines, so we wanted to use each DSL-Uplink for different local subnets. No failover or load balancing. Just active/active.

We have a local net 192.168.100.0/24 and another with 192.168.200.0/24.

Now we created one WAN-Interface where 192.168.101.254 is the Sophos Port and 192.168.101.1 is the corrosponding router/gateway to our ISP1.

And another with 192.168.201.254 for the Sophos Port and 192.168.201.1 for the corresponding router/gateway to our ISP2.

Now we wanted to use firewall rules to route traffic from our internal net 192.168.100.0 to ISP1 and 192.168.200.0 to ISP2.

But we only see one of the ISP uplinks as a "green" status. The other one is in "red" status, allthough we can test this WAN line just fine, when we put a host in the corresponding network.

Any ideas? Need any more infos? Thank you for any input  Confounded

We are on 17.5.15 MR-15.



This thread was automatically locked due to age.