Guest User!

You are not Sophos Staff.

Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 6 replies
  • Subscribers 26 subscribers
  • Views 4363 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problems to configure High availability

Ruflex

Hi! i have 2 Sophos SG230 whit SFOS 18.0.3 MR-3.

I configure high availability in active-pasive mode, whit the same key in the 2 firewalls. I configure the second firewall in auxiliary and conects all cables to firewalls.

When initiate ha, the primary firewalls show "HA could not be enabled"

I run this command in advanced shell: cat /log/applog.log | grep "ha:"

Nov 26 11:56:49 Validation Failed For Ha interface IP

Nov 26 11:56:49 ha: pollenableha: enableha failed

how i can fix this problem?? Thanx



This thread was automatically locked due to age.
Parents
  • 0

    After conducting several tests according to h_patel's suggestions, we have found the solution. It is the simplest way, you do not have to complicate with so much. In my case, in the auxiliary I had to erase all the configurations except a lan connection port to access the firewall. Disable all dhcp and also remove wifi. Only with an internal IP and assigning the same synchronization port in the two devices, the ha mode has been enabled the first time.

    Thank you H_Patel for your help

Reply
  • 0

    After conducting several tests according to h_patel's suggestions, we have found the solution. It is the simplest way, you do not have to complicate with so much. In my case, in the auxiliary I had to erase all the configurations except a lan connection port to access the firewall. Disable all dhcp and also remove wifi. Only with an internal IP and assigning the same synchronization port in the two devices, the ha mode has been enabled the first time.

    Thank you H_Patel for your help

Children
No Data
Share Feedback
×

Submitted a Tech Support Case lately from the Support Portal?