Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 27 subscribers
  • Views 1144 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Remote SSL-VPN users cannot communicate with network connected via IPSec VPN

John Orland Pinauin

Network A - 192.168.1.0/24
XG A - 192.168.1.10
Network B - 192.168.2.0/24
XG B - 192.168.2.10

IPSEC VPN between the two XG is working fine, all hosts are accessible from branch office to head office and vice versa.

The problem is that the remote SSL-VPN users connected to XG in Network A cannot connect to hosts in Network B. They can only connect to Network A users.

What are the steps that needs to be done in order to make the SSL-VPN users from network A to communicate with network B?

Thank you.



This thread was automatically locked due to age.
Parents
  • +1

    Hello John,

    Thank you for contacting the Sophos Community!

    Please take a look at this KB, this explains the steps to achieve this.

    But basically, you want to add in the SSL VPN allowed networks the subnet of the Network B Firewall.

    Then in the IPsec tunnel, you want to add the SSL VPN pool of Network A in both XG firewalls, (make sure to change the SSL VPN pool on the Network B to not overlap the one from the Network A Firewall)

    Regards,

Reply
  • +1

    Hello John,

    Thank you for contacting the Sophos Community!

    Please take a look at this KB, this explains the steps to achieve this.

    But basically, you want to add in the SSL VPN allowed networks the subnet of the Network B Firewall.

    Then in the IPsec tunnel, you want to add the SSL VPN pool of Network A in both XG firewalls, (make sure to change the SSL VPN pool on the Network B to not overlap the one from the Network A Firewall)

    Regards,

Children