Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 4 replies
  • Subscribers 26 subscribers
  • Views 3429 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

3CX and XG 18 Configuration

Dave Cooke

Trying to duplicate the setting from https://community.spiceworks.com/how_to/170547-sophos-xg-configuration-for-3cx.  It appears it's based on an eelier version and I'm having difficulties recreating it on SFOS 18.0.1 MR-1-Build396.



This thread was automatically locked due to age.
Parents
  • 0

    Setup the Firewall and DNAT.  The log shows the inbound connection as accepted but still unable to reach server.  My test was from external server IP on Port 5001.  Thank you for your assistance.  See image link only good for a month.  ibb.co/.../9N4QNn0:640:50] 

Reply
  • 0

    Setup the Firewall and DNAT.  The log shows the inbound connection as accepted but still unable to reach server.  My test was from external server IP on Port 5001.  Thank you for your assistance.  See image link only good for a month.  ibb.co/.../9N4QNn0:640:50] 

Children
  • FormerMember
    0 FormerMember in reply to Dave Cooke

    Hi ,

    Thank you for the update! 

    Did you see any reply from the server to the external connection request? What if the connection request is blocked/dropped post firewall? 

    Did you unload the SIP module on your firewall? 

    Thanks,

  • 0 in reply to FormerMember

    Good Morning,

    Thanks for the responses!

    After not seeing a capture from the external IP, WAN IP or FW IP I saw that the IP address on server was different when I logged on  locally.  I thought I changed the IP on the server which lead me in the wrong direction.

    Thank you again for your responses and patience.

    Dave