Hi folks,
some questions about 2.4ghz mesh and performance.
I have created a mesh using two AP55s and an AP55c on 2.4ghz for the IoT devices.
The three APs are seperated by about 10m with on in line of site and the other through internal walls.
The following screenshots show my confusion.
Why do the APs report back to each other and not through the root AP?
IoT 3.16 is within 3m of the AP55IoT1 but through a brick wall
IoT 3.17 and 3.18 are within 3m of AP55IoT2 but through a brick wall.
The issue being I would have expected the IoT devices to connect to the nearest and supposedly strongest SSID, so what is wrong?
The AP are set on dynamic channel and auto scanning. Currently they are all on CH1 and have been for a couple of days. Channel width is set to 40mhz and 100%b power.
I have tried arranging the antennea at different angles and at the moment that seems to give the best results providing the cat does not rearrange the APs.
Your thoughts
Ian
This thread was automatically locked due to age.
