Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 28 subscribers
  • Views 1077 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos Connect Client allow access to remote sites

fireb

Hi,

i want to configure the Sophos Connect Client to access the main network and two remote Sites.

Here is an quick overview of my current network configuration:

Main Office (XG125): 10.1.1.0/24

Branch Office 1: 10.1.2.0/24

Branch Office 2: 10.1.4.0/24

 

If I now connect to the main office with the client, then I cannot access the two branches. In the sophos connect client settings i set an IP- Range inside the main office range but then i can only access the two branches and no longer access the main office network.

If I use another range, such as 10.1.10.100 to 10.1.10.200, then I can only access the main office.

Can you tell me what I'm doing wrong?

 

Best regards

fireb



This thread was automatically locked due to age.
Parents
  • 0

    Hi  

    I would suggest, connect Main office and BO1 via IPSec , same way for BO2, if there is a possibility of same based on remote end router or firewall.

    Site-to-Site IPsec VPN connection using a preshared key:

    https://community.sophos.com/kb/en-us/123140

    In this IPSec settings in the Main office side in local LAN network define LAN network and Sophos connect client network in the local LAN, vice versa define network on remote end BO1 and Bo2. Create VPN to VPN rule on HO and confirm the status.

Reply
  • 0

    Hi  

    I would suggest, connect Main office and BO1 via IPSec , same way for BO2, if there is a possibility of same based on remote end router or firewall.

    Site-to-Site IPsec VPN connection using a preshared key:

    https://community.sophos.com/kb/en-us/123140

    In this IPSec settings in the Main office side in local LAN network define LAN network and Sophos connect client network in the local LAN, vice versa define network on remote end BO1 and Bo2. Create VPN to VPN rule on HO and confirm the status.

Children
No Data