Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 30 subscribers
  • Views 1759 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XG - pointopoint configuration - automatic script after boot?

maxUTM

Hello,

i finally got the XG working on a HETZNER datacenter, with pointopoint configuration.

Many thanks to this thread: https://community.sophos.com/products/xg-firewall/f/initial-setup/91528/initial-setup-from-serial-console

But the XG forgets the necessary settings after every reboot, so i need to do this after every boot:

CLI:
1. enter admin password
2. select 5. device management
3. select 3. advanced shell
4. ifconfig Port1 pointopoit gateway-ip-address
5. route add default gw gateway-ip-address

after that i can access the webinterface via WAN.

is there any possibility to automatically do 4. and 5. after a reboot?

I just don't want to do that manually every time.

Any help is appreciated.

Thanks!



This thread was automatically locked due to age.
Parents
  • 0

    Hey Max, ich stehe gerade vor dem selben Problem. Konntest du es lösen? Gruß Markus

  • 0 in reply to Markus Schatz

    XG does not support WAN Point to Point interfaces. Thats the reason, the WEB Gui is prevent to do so. 

    We can achieve this with custom gateway and SD-WAN PBR(Policy based Routing):

    Create WAN Interface base static route for gw IP in different subnet.
    Add a custom Gateway for gw IP. Use that custom gw in PBR.

    So basically configure the Interface as a normal interface.

    Create a route / gateway for this interface to WAN. 

    Use PBR or static routing to route everything to that direction. 

Reply
  • 0 in reply to Markus Schatz

    XG does not support WAN Point to Point interfaces. Thats the reason, the WEB Gui is prevent to do so. 

    We can achieve this with custom gateway and SD-WAN PBR(Policy based Routing):

    Create WAN Interface base static route for gw IP in different subnet.
    Add a custom Gateway for gw IP. Use that custom gw in PBR.

    So basically configure the Interface as a normal interface.

    Create a route / gateway for this interface to WAN. 

    Use PBR or static routing to route everything to that direction. 

Children
No Data