Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 27 subscribers
  • Views 578 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos Connect mit Ziel im gleichen IP Kreis

Kevin Brach

Hallo zusammen, 

 

ich hab folgendes Problem was ich gerne lösen würde. 

 

Wir nutzen als VPN zur Zeit Sophos Connect. Das klappt auch wunderbar! Nur ist es so das unser Firmen Netz auf der IP 192.168.0.XXX läuft. Wenn jetzt ein Mitarbeiter zuhause die gleiche IP Range hat kann er sich nicht per RDP auf den Server Verbinden.. 

 

Gibt es hierfür vielleicht eine Lösung bzw hat jemand eine Idee wie ich das ändern kann? 



This thread was automatically locked due to age.
  • 0

    As you could create a DNAT, you could hide the Real Destination on XG. 

     

    For example: 192.168.0.5 is your RDP Server. You would create a fake IP on XG as 10.0.0.5 : This IP DNATs to 192.168.0.5. Therefore the client can open the connection. 

     

    In V18, you can create a 1:1 NAT: 10.0.0.0/24 to 192.168.0.0/24. So each IP will be matched 1:1. 

     

    That is one way to resolve this. Maybe attach DNS to this, as you do not need to remember the IPS after the NAT. 

  • 0 in reply to LuCar Toni

    Thanks for the answer. Unfortunately we have not yet installed V18, because during the last update there were some problems with our RED which did not connect anymore.

    Is there a manual somewhere that explains under V17 how to configure the DNAT correctly?