Thread Info
  • State Suggested Answer
  • +6 person also asked this people also asked this
  • Locked Locked
  • Replies 47 replies
  • Answers 4 answers
  • Subscribers 46 subscribers
  • Views 25622 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

v18 MR-1 killing all traffic

Gary Parr

I loaded MR-1, everything was fine for a while then suddenly all traffic dropped. I could still get into XG itself and nothing looked wrong, so I thought it was an upstream device. I rebooted those but still nothing. Rebooted XG and suddenly everything started working again. No more than 15 minutes later, all traffic died again. This time I spent some time looking at the XG logs but nothing stood out. No services were reported down and all interfaces and gateways reported as up. I have since reverted back to GA build 354 and all again is right with the world. When I have some time I can push MR-1 back on and dig some more, but wanted to share in case anyone else has had a similar experience.



This thread was automatically locked due to age.
Parents
  • 0

    Mine lasted 8 hours before doing exactly as you describe. I cannot find anything in the logs, the GUI showed no extra loads. Restart fixed the issue for the moment while I investigate further.

    Ian

     

    Restart did not fix the issue, required a power removal and then a power on before I have connectivity again.

    Not good.

    Something wrong because my XG is continually reporting new firmware for APs and REDs even though the latest  version is installed and the APs are working.

    Still nothing of value in the logs.

Reply
  • 0

    Mine lasted 8 hours before doing exactly as you describe. I cannot find anything in the logs, the GUI showed no extra loads. Restart fixed the issue for the moment while I investigate further.

    Ian

     

    Restart did not fix the issue, required a power removal and then a power on before I have connectivity again.

    Not good.

    Something wrong because my XG is continually reporting new firmware for APs and REDs even though the latest  version is installed and the APs are working.

    Still nothing of value in the logs.

Children