Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 27 subscribers
  • Views 542 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Site2Site tunnel zwischen zwei Sophos XG und Fritzbox

Christoph Reisbach-Sawinski

Hallo zusammen,

 

ich habe folgende Konstellation:

 

HQ: XG320

Homeoffice: XG320 hinter einer FritzBox

 

Site 2 Site VPN läuft. Alles ohne Probleme.

Es gibt ein Client VLAN im Homeoffice mit dem ich mich problemlos ins HQ verbinden kann und umgekehrt klappt auch alles.

ABER: Ich möchte vom HQ auf die FritzBox zugreifen können.

 

Konfig: PortE0.1220 10.10.10.x

Port E1 feste IP in der Range der Fritzbox 192.168.178.x

Ich komme aus dem Homeoffice auf die Fritzbox. Nur aus dem HQ nicht.

 

Welchen Denkfehler habe ich?

 

LG
Christoph



This thread was automatically locked due to age.
Parents
  • 0

    Hello  

    Based on the translation provided by Google, it sounds like you would like to access a device on your home network which is connected to an IPsec site-to-site tunnel from your office.

    You will need to ensure that the IP range of the device (Fritzbox) is in the IPsec tunnel configuration on both ends.

    That should then allow you to route over the IPsec tunnel to the Fritzbox.

    Thanks!

Reply
  • 0

    Hello  

    Based on the translation provided by Google, it sounds like you would like to access a device on your home network which is connected to an IPsec site-to-site tunnel from your office.

    You will need to ensure that the IP range of the device (Fritzbox) is in the IPsec tunnel configuration on both ends.

    That should then allow you to route over the IPsec tunnel to the Fritzbox.

    Thanks!

Children
No Data