This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

how does xg v18 determine country of ip

This ip was flagged by a rule that has a bunch of countries that I block.  The UK is not in my list, yet the below IP is getting blocked by this rule.  What source is XG using to determine the country?  I have included ip lookup results are from ultratools.

2020-02-23 19:23:21Firewallmessageid="00002" log_type="Firewall" log_component="Firewall Rule" log_subtype="Denied" status="Deny" con_duration="0" fw_rule_id="12" nat_rule_id="0" policy_type="1" user="" user_group="" web_policy_id="2" ips_policy_id="0" appfilter_policy_id="0" app_name="" app_risk="0" app_technology="" app_category="" vlan_id="0" ether_type="IPv4 (0x0800)" bridge_name="" bridge_display_name="" in_interface="Port1" in_display_interface="Port1" out_interface="Port2" out_display_interface="Port2" src_mac="xxx" dst_mac="" src_ip="xxx" src_country="R1" dst_ip="185.216.34.227" dst_country="AUT" protocol="UDP" src_port="51222" dst_port="8888" packets_sent="0" packets_received="0" bytes_sent="0" bytes_received="0" src_trans_ip="" src_trans_port="0" dst_trans_ip="" dst_trans_port="0" src_zone_type="" src_zone="" dst_zone_type="" dst_zone="" con_direction="" con_id="" virt_con_id="" hb_status="No Heartbeat" message="" appresolvedby="Signature" app_is_cloud="0"

inetnum:        185.216.34.0 - 185.216.34.255
netname:        M247-LTD-Vienna
descr:          M247 LTD Vienna Infrastructure
country:        AT
geoloc:         48.2000 16.3667
admin-c:        GBXS-RIPE
tech-c:         GBXS-RIPE
status:         LIR-PARTITIONED PA
mnt-by:         GLOBALAXS-MNT
source:         RIPE

organisation:   ORG-GL37-RIPE
org-name:       M247 Ltd
org-type:       LIR
address:        1 Ball Green, Cobra Court
address:        M32 0QT
address:        Manchester
address:        UNITED KINGDOM

Thanks,
Gary


This thread was automatically locked due to age.