Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 3 replies
  • Subscribers 27 subscribers
  • Views 1380 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sophos XG, configure cluster HA.

IvanildoGalvão

Gentlemen, I'm taking a beating from Cluster HA at XG, two days ago.

I have two Sophos XG VMS, on Virtualbox, I also tried on Vmware. I configured the HA as it has in the manuals of Sophos itself.
Every time I configure the Active / Active HA, the auxiliary XG restarts, its Port1 (LAN) interface remains with the same IP as the primary XG and from there I no longer access either.

Does anyone know where I'm going wrong?

Thanks !



This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to Vishal_R

    I’m only VMware vSphere, I’ll try to enable this on the PortGroup of the virtual Switch.

    I need to resolve this doubt today, because at night I will set up an active / passive HA cluster with two XG 230 on the client, I cannot be in doubt when performing this activity.

  • 0 in reply to Vishal_R
     
    Thanks for the help, it worked, in the case of VMware the fields to enable are different, but that is the same thing as MAC Spoofing.
    After enabling, I was able to configure the cluster perfectly, I tested both the active / active and the active / passive.
    I'm putting an image here, with the configuration made in the PortGroup of the virtual Switch, in VMware.
     
     
Cookie Information Banner