This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

MAC Whitelist

Dear Community,

is there an easy way or a guide / tutorial thats shows how it´s possible to add a whitelist for allowed MAC addresses that using wifi on a XG appliance?

All i´ve found is for older devices or how to block (blacklist) access for specific MAC addresses.

 

Thanks in advance.

 



This thread was automatically locked due to age.
Parents
  • Hi,

    I didn't find it in the Knowledge base, so here is a guide how it should work out.
    Please note that you must pay attention to how you have set up your wireless network. Bridged access points to the LAN or other configuration settings could cause problems and you may need to adjust these other settings accordingly.

    1. Add a so called Mac host at System > Hosts and Services > MAC host
    2. Add a firewall rule to allow traffic from Wifi Zone and the specific mac host list to WAN
    3. Don't forget to create a SNAT rule to masquerade traffic when going out to WAN

    Kind regards,

Reply
  • Hi,

    I didn't find it in the Knowledge base, so here is a guide how it should work out.
    Please note that you must pay attention to how you have set up your wireless network. Bridged access points to the LAN or other configuration settings could cause problems and you may need to adjust these other settings accordingly.

    1. Add a so called Mac host at System > Hosts and Services > MAC host
    2. Add a firewall rule to allow traffic from Wifi Zone and the specific mac host list to WAN
    3. Don't forget to create a SNAT rule to masquerade traffic when going out to WAN

    Kind regards,

Children