I would like to get 100% confirmation that this either works or does not work. Based on reading this board and articles posted in the KB I cannot find a definitive answer. I see some issues from back in 2016 but cannot determine if they were ever resolved.
Setup:
XG firewall running 17.5.8
Red 15w: 10.100.100.1/26, DHCP relay to Windows DHCP server with 234 option set pointing to the FW. Standard/Split
Hardwired ports all work in this setup perfectly. Internet traffic goes out and LAN traffic stays in.
Built-In wireless is not working. I was able to register the "internal" AP the first time around with Standard/Unified.
Changing that to Standard/Split no longer sees the internal AP on the Red 15w. It does not get an address from the DHCP server or show up in the pending access points. At first, I thought it might be because of the DHCP server and not being able to relay. So, I changed it to the XG handling the DHCP requests. Still nothing. I have researched a bit into bridge-to-LAN but have not found a way to get that to work with the Red 15w.
Big question:
Is it possible to have an XG and Red 15w operate with a DHCP relay/XG DHCP in Standard/Split mode that includes both the physical ports and the WIFI?
Another option I am considering is a base model Red and an AP 15.
Any suggestions would be greatly appreciated.
This thread was automatically locked due to age.
