This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to change default LAN port A1 (1G) to Port C1 (10G)

Hi frnds,

I have done some searching and cannot find a proper solution.

So currently I have port A1 as my LAN from where all LAN traffic is going and I want to use port C1(Which is a 10G port) as default LAN port where it works the same as port A1.

This thread was automatically locked due to age.

Parents

0 rfcat_vk over 5 years ago

Hi,

you will have to edit each firewall rule to point at the new link. You can try using the gateway field in the DHCP server but you will still need to change the firewall rules if you plan to disable the slower link.

Ian
Cancel
Vote Up 0 Vote Down

Cancel
0 Ravindra Jangir over 5 years ago in reply to rfcat_vk

HI

It is already done both the Ports are in firewall
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk over 5 years ago in reply to Ravindra Jangir

My mistake I thought you were talking external.

You will need to change the IP address of every device to the IP range on the 10G uses it is just a link to the switch where you would disable the 1g and the switch should reroute the traffic over the 10G.

Ian
Cancel
Vote Up 0 Vote Down

Cancel
0 Ravindra Jangir over 5 years ago in reply to rfcat_vk

Hi

I have done the same ie. Change the PORT C1 IP address with PortA1 but still traffic is going from portA1. If i am disconnecting postA1 then not able to access the device it self.
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk over 5 years ago in reply to Ravindra Jangir

You might need to reboot the switch and XG to make them talk over the new link. The switch will have a different MAC for the IP address so most definitely will need a restart.

Ian
Cancel
Vote Up 0 Vote Down

Cancel
0 Ravindra Jangir over 5 years ago in reply to rfcat_vk

Hi

I restarted the device but still same issue. If I unplugged PortA1 cable I am not able to access even PortC1.
Cancel
Vote Up 0 Vote Down

Cancel
0 rfcat_vk over 5 years ago in reply to Ravindra Jangir

Try setting C1 to autonegotiate.

Is you switch managed and if so what does it show for the C1 connection?

Ian
Cancel
Vote Up 0 Vote Down

Cancel
0 lferrara over 5 years ago in reply to rfcat_vk

Ian,

the problem is that in the postgres the portA1 is referenced somewhere and changing all the objects where the port is used on XG can require a lot of times.

This is something to be done via advanced shell. I provided to the user commands to query and change the port from advanced shell. Waiting for feedback before writing here the proper way to change in one shot the port on psql.

Regards
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 lferrara over 5 years ago in reply to rfcat_vk

Ian,

the problem is that in the postgres the portA1 is referenced somewhere and changing all the objects where the port is used on XG can require a lot of times.

This is something to be done via advanced shell. I provided to the user commands to query and change the port from advanced shell. Waiting for feedback before writing here the proper way to change in one shot the port on psql.

Regards
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 rfcat_vk over 5 years ago in reply to lferrara

Hi Luk,

thank you for your update and knowledge.

Ian
Cancel
Vote Up 0 Vote Down

Cancel