Configuring an interface

Dylar,

if the third interface belongs to LAN zone, create a LAN to LAN firewall rule.

Make sure that each interface has a different ip address/netmask.

Regards

Dylar,

if the third interface belongs to LAN zone, create a LAN to LAN firewall rule.

Make sure that each interface has a different ip address/netmask.

Regards

Thank you. So i have created the following 

1. Created a Zone and added it to LAN type and under network services have enabled DNS and Ping

2. Under interfaces selected the Port and assigned it to the zone that was created in step 1 and have given it an ip address in the same LAN range.

3. Created a firewall rule and under sources clicked LAN and Network devices selected my preferred server A

4. Under destination zone is LAN and destnation network selected my preferred server B

Device A - 192.168.1.10

Device B - 192.168.1.15

Port 3 - 192.168.1.20 

I am unable to ping from Device A to Device B or from any other device from the LAN. I am able to ping Device B from the XG itself and by selecting Port on which it is connected.

Please share a network diagram. Thanks

Please see diagram

Thanks for the drawing. Port A and port C are both in the same subnet? Why?