Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 29 subscribers
  • Views 2223 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

No LAN traffic since changing interface to a lag

Mvz040

Hi,

After changing an single interface (int 1) for the LAN network to a double interface LAG (int 3+7) on my XG135, the seems to be no routing.

However dhcp is being send out over the LAG but we can’t ping the XG and there is no route to the WAN.

But the strange thing is that the WAN is also changed from an single interface (int 8) to an LAG (int 4+8) and the XG is reachable from the WAN side. So i’m sure the LACP is configured correctly, also since we are getting an ip adres from the dhcp server.

What am i forgetting to change?

Looking forward to solve the issues with you guys!



This thread was automatically locked due to age.
Parents
  • 0

    If your trying to connect from a different network then what the interface is actually on, and you don't use a dynamic routing protocol then you will have to update any static routes you have to use the LAG interface now. 

  • 0 in reply to tragikcomic

    Thanks for your reply,

    i haven't got any static routes configured, also no dynamic routing protocol.


    This is the old setup


    And this is the new one.

    i'm able to reach 192.168.10.1 without any problems now but when i unplug Port8, than i've got no possibility to reach the XG. So it seems that all traffic still passes through Port 8.

    What am i missing here?

Reply
  • 0 in reply to tragikcomic

    Thanks for your reply,

    i haven't got any static routes configured, also no dynamic routing protocol.


    This is the old setup


    And this is the new one.

    i'm able to reach 192.168.10.1 without any problems now but when i unplug Port8, than i've got no possibility to reach the XG. So it seems that all traffic still passes through Port 8.

    What am i missing here?

Children